Owner's Manual
Table Of Contents
- Instruction Manual
- Supplied Accessories
- Parts & Controls
- Memory Card Compatibility
- Introduction
- Getting Started
- Charging the Battery
- Installing and Removing the Battery
- Installing and Removing the Card
- Turning on the Power
- Setting the Date, Time, and Zone
- Selecting the Interface Language
- Attaching and Detaching a Lens
- Basic Operation
- Quick Control for Shooting Functions
- Menu Operations
- Before You Start
- Displaying the Grid in the Viewfinder
- Displaying the Electronic Level
- Setting the Viewfinder Information Display
- Help
- Setting the AF and Drive Modes
- Image Settings
- Selecting the Card for Recording and Playback
- Setting the Image-Recording Quality
- Setting the ISO Speed for Still Photos
- Selecting a Picture Style
- Customizing a Picture Style
- Registering a Picture Style
- Setting the White Balance
- Custom White Balance
- Setting the Color Temperature
- White Balance Correction
- Auto Correction of Brightness and Contrast
- Setting Noise Reduction
- Highlight Tone Priority
- Correction of Lens Aberrations
- Reducing Flicker
- Setting the Color Space
- Creating and Selecting a Folder
- Changing the File Name
- File Numbering Methods
- Setting Copyright Information
- GPS Settings
- Exposure Control for Photographic Expressions
- Flash Photography
- Shooting with the LCD Monitor (Live View Shooting)
- Shooting Movies
- Image Playback
- Image Playback
- Shooting Information Display
- Searching for Images Quickly
- Magnifying Images
- Rotating the Image
- Protecting Images
- Setting Ratings
- Recording and Playing back Voice Memos
- Quick Control for Playback
- Enjoying Movies
- Playing Back Movies
- Editing a Movie’s First and Last Scenes
- Grabbing a Frame from 4K Movies
- Slide Show (Auto Playback)
- Viewing Images on a TV Set
- Copying Images
- Erasing Images
- Changing Image Playback Settings
- Post-Processing Images
- Sensor Cleaning
- Transferring Images to a Computer and Print Ordering
- Customizing the Camera
- Reference
- Downloading Images to a Computer / Software
- Index
- Specs
- Troubleshooting
Focusing with AF (AF Method)
290
In the [FlexiZone - Single] mode, either
press the <u> button or tap on [d]
displayed on the bottom right of the
screen. You can magnify the image by
approx. 5x or 10x and check the focus.
To move the AF point, operate <9> or tap on the spot you want to
magnify.
Either press the <u> button or tap on [d] to magnify the image.
Each time you press the <u> button or tap on [d], the
magnification ratio changes.
At 100% (approx. 1x) magnification, operate <9> or tap on the
screen to move the magnifying frame. Pressing <9>, <0>, or
<L> button will return the magnifying frame to the screen center.
Either press the <u> button or tap on [d] to magnify the area
covered by the magnifying frame.
When the image is magnified by approx. 5x or 10x, you can change
the magnified area by operating <9> or tapping on the triangle on
the screen top, bottom, left, or right.
If you press the shutter button halfway, AF will be performed in the
magnified view.
If focusing is difficult in the magnified view, return to the normal view
and perform AF.
Magnified View for FlexiZone - Single
Magnified view is not possible with [u+Tracking].
If you perform AF in the normal view and then the view is magnified,
accurate focus may not be achieved.
AF speed differs between normal view and magnified view.
When in magnified view, Movie Servo AF (p.331) will not work.
In magnified view, images will be displayed without chromatic aberration
correction or distortion correction applied.
During magnified view, achieving focus becomes more difficult due to
camera shake. Using a tripod is recommended.