Owner's Manual
Table Of Contents
- Instruction Manual
- Supplied Accessories
- Parts & Controls
- Memory Card Compatibility
- Introduction
- Getting Started
- Charging the Battery
- Installing and Removing the Battery
- Installing and Removing the Card
- Turning on the Power
- Setting the Date, Time, and Zone
- Selecting the Interface Language
- Attaching and Detaching a Lens
- Basic Operation
- Quick Control for Shooting Functions
- Menu Operations
- Before You Start
- Displaying the Grid in the Viewfinder
- Displaying the Electronic Level
- Setting the Viewfinder Information Display
- Help
- Setting the AF and Drive Modes
- Image Settings
- Selecting the Card for Recording and Playback
- Setting the Image-Recording Quality
- Setting the ISO Speed for Still Photos
- Selecting a Picture Style
- Customizing a Picture Style
- Registering a Picture Style
- Setting the White Balance
- Custom White Balance
- Setting the Color Temperature
- White Balance Correction
- Auto Correction of Brightness and Contrast
- Setting Noise Reduction
- Highlight Tone Priority
- Correction of Lens Aberrations
- Reducing Flicker
- Setting the Color Space
- Creating and Selecting a Folder
- Changing the File Name
- File Numbering Methods
- Setting Copyright Information
- GPS Settings
- Exposure Control for Photographic Expressions
- Flash Photography
- Shooting with the LCD Monitor (Live View Shooting)
- Shooting Movies
- Image Playback
- Image Playback
- Shooting Information Display
- Searching for Images Quickly
- Magnifying Images
- Rotating the Image
- Protecting Images
- Setting Ratings
- Recording and Playing back Voice Memos
- Quick Control for Playback
- Enjoying Movies
- Playing Back Movies
- Editing a Movie’s First and Last Scenes
- Grabbing a Frame from 4K Movies
- Slide Show (Auto Playback)
- Viewing Images on a TV Set
- Copying Images
- Erasing Images
- Changing Image Playback Settings
- Post-Processing Images
- Sensor Cleaning
- Transferring Images to a Computer and Print Ordering
- Customizing the Camera
- Reference
- Downloading Images to a Computer / Software
- Index
- Specs
- Troubleshooting
7 Custom Controls
450
After setting and assigning this function to a button, you can apply the
following settings by holding down the assigned button for AF: AF area
selection mode (p.91), Tracking sensitivity (p.118), Acceleration/
deceleration tracking (p.119), AF point auto switching (p.120), Servo 1st
image priority (p.122), and Servo 2nd image priority (p.123). Useful
when you want to change the AF characteristics during AI Servo AF.
*2: With the setting screen displayed, press the
<B> button to display the detailed settings
screen. Turn the <5> or <6> dial to select the
parameter to be registered, then press <0> to
add a checkmark [X]. When you select a
parameter, then press <0>, you can adjust the
parameter setting. By pressing the <L> button,
you can revert the settings to their defaults.
You can switch the AF operation. In One-Shot AF mode, when you
press the button to which this function is assigned, the camera switches
to AI Servo AF mode. If you press the button in the AI Servo AF mode,
the camera switches to One-Shot AF mode. Useful when you need to
keep switching between One-Shot AF and AI Servo AF for a subject
that keeps moving and stopping.
*3: With the setting screen displayed, when you press the <B> button, you can select
[Switch only when btn is held] or [Switch each time btn is pressed].
During metering, when you press the button assigned to this function,
focusing point can be switched to the registered AF point.
*4: With the setting screen displayed, when you press the <B> button, you can select
[Switch only when btn is held] or [Switch each time btn is pressed]. To register
the AF point, see page 448.
: Switch to registered AF function
: ONE SHOT z AI SERVO
: Switch to registered AF point