User Manual
Table Of Contents
- EOS-1D X Mark II
- Introduction
- Getting Started
- Charging the Battery
- Installing and Removing the Battery
- Installing and Removing the Card
- Turning on the Power
- Setting the Date, Time, and Zone
- Selecting the Interface Language
- Attaching and Detaching a Lens
- Basic Operation
- Quick Control for Shooting Functions
- Menu Operations
- Before You Start
- Displaying the Grid in the Viewfinder
- Displaying the Electronic Level
- Setting the Viewfinder Information Display
- Help
- Setting the AF and Drive Modes
- Image Settings
- Selecting the Card for Recording and Playback
- Setting the Image-Recording Quality
- Setting the ISO Speed for Still Photos
- Selecting a Picture Style
- Customizing a Picture Style
- Registering a Picture Style
- Setting the White Balance
- Custom White Balance
- Setting the Color Temperature
- White Balance Correction
- Auto Correction of Brightness and Contrast
- Setting Noise Reduction
- Highlight Tone Priority
- Correction of Lens Aberrations
- Reducing Flicker
- Setting the Color Space
- Creating and Selecting a Folder
- Changing the File Name
- File Numbering Methods
- Setting Copyright Information
- GPS Settings
- Exposure Control for Photographic Expressions
- Flash Photography
- Shooting with the LCD Monitor (Live View Shooting)
- Shooting Movies
- Image Playback
- Image Playback
- INFO. Shooting Information Display
- Searching for Images Quickly
- Magnifying Images
- Rotating the Image
- Protecting Images
- Setting Ratings
- Recording and Playing back Voice Memos
- Quick Control for Playback
- Enjoying Movies
- Playing Back Movies
- Editing a Movie’s First and Last Scenes
- Grabbing a Frame from 4K Movies
- Slide Show (Auto Playback)
- Viewing Images on a TV Set
- Copying Images
- Erasing Images
- Changing Image Playback Settings
- Post-Processing Images
- Sensor Cleaning
- Transferring Images to a Computer and Print Ordering
- Customizing the Camera
- Reference
- Software Overview
133
3 Customizing AF Functions
: Separate AF pts: Area+pt
The AF area selection mode and AF point (or zone) can be set
separately for each camera orientation (1. Horizontal, 2. Vertical with
the camera grip at the top, 3. Vertical with the camera grip at the
bottom).
When you manually select the AF area selection mode and AF point
(or zone) for each of the three camera orientations, they will be
registered for the respective orientation. Whenever you change the
camera orientation during shooting, the camera will switch to the AF
area selection mode and manually-selected AF point (or zone) set
for that orientation.
: Separate AF pts: Pt only
The AF point can be set separately for each camera orientation (1.
Horizontal, 2. Vertical with the camera grip at the top, 3. Vertical with
the camera grip at the bottom). While using the same AF area
selection mode, the AF point will switch automatically for the
respective camera orientation.
When you manually select the AF point for each of the three camera
orientations, it will be registered for the respective orientation. During
shooting, the AF point will switch to the manually-selected one
depending on the camera orientation. Even if you change the AF
area selection mode to Manual select.:Spot AF, Manual selection:1 pt
AF, Expand AF area: , or Expand AF area: Surround, the AF point
set for the respective orientation will be retained.
If you change the AF area selection mode to Zone AF or Large Zone
AF, the zone will switch to the manually-selected one for the
respective camera orientation.
If you clear the camera settings to their defaults (p.77), the setting will be
[Same for both vert/horiz]. Also, your settings for the three camera
orientations (1, 2 and 3) will be cleared and all three will revert to Single-
point AF with the center AF point selected.
If you set this and later attach a lens from a different AF group (p.102-
108, particularly group I, J, or K), the setting may be cleared.