User Manual

Table Of Contents
191
3 Setting Noise Reduction
For images exposed for 1 sec. or longer, noise (dots of light and
banding) typical of long exposures can be reduced.
1
Select [Long exp. noise
reduction].
Under the [z2] tab, select [Long
exp. noise reduction], then press
<0>.
2
Set the desired setting.
Select the desired setting, then press
<0>.
Auto
For exposures of 1 sec. or longer, noise reduction is performed
automatically if noise typical of long exposures is detected. This
[Auto] setting is effective in most cases.
Enable
Noise reduction is performed for all exposures of 1 sec. or longer.
The [Enable] setting may reduce noise that cannot be detected with
the [Auto] setting.
3
Take the picture.
The image will be recorded with noise
reduction applied.
Long Exposure Noise Reduction