User Manual
Table Of Contents
- EOS-1D X Mark II
- Introduction
- Getting Started
- Charging the Battery
- Installing and Removing the Battery
- Installing and Removing the Card
- Turning on the Power
- Setting the Date, Time, and Zone
- Selecting the Interface Language
- Attaching and Detaching a Lens
- Basic Operation
- Quick Control for Shooting Functions
- Menu Operations
- Before You Start
- Displaying the Grid in the Viewfinder
- Displaying the Electronic Level
- Setting the Viewfinder Information Display
- Help
- Setting the AF and Drive Modes
- Image Settings
- Selecting the Card for Recording and Playback
- Setting the Image-Recording Quality
- Setting the ISO Speed for Still Photos
- Selecting a Picture Style
- Customizing a Picture Style
- Registering a Picture Style
- Setting the White Balance
- Custom White Balance
- Setting the Color Temperature
- White Balance Correction
- Auto Correction of Brightness and Contrast
- Setting Noise Reduction
- Highlight Tone Priority
- Correction of Lens Aberrations
- Reducing Flicker
- Setting the Color Space
- Creating and Selecting a Folder
- Changing the File Name
- File Numbering Methods
- Setting Copyright Information
- GPS Settings
- Exposure Control for Photographic Expressions
- Flash Photography
- Shooting with the LCD Monitor (Live View Shooting)
- Shooting Movies
- Image Playback
- Image Playback
- INFO. Shooting Information Display
- Searching for Images Quickly
- Magnifying Images
- Rotating the Image
- Protecting Images
- Setting Ratings
- Recording and Playing back Voice Memos
- Quick Control for Playback
- Enjoying Movies
- Playing Back Movies
- Editing a Movie’s First and Last Scenes
- Grabbing a Frame from 4K Movies
- Slide Show (Auto Playback)
- Viewing Images on a TV Set
- Copying Images
- Erasing Images
- Changing Image Playback Settings
- Post-Processing Images
- Sensor Cleaning
- Transferring Images to a Computer and Print Ordering
- Customizing the Camera
- Reference
- Software Overview
3 Correction of Lens Aberrations
196
1
Select [Diffraction correction].
2
Select [Enable].
Select [Enable], then press <0>.
3
Take the picture.
The image will be recorded with the
diffraction corrected.
Diffraction Correction
When distortion correction is enabled, the camera records an image
range narrower than the one seen through the viewfinder. (The image
periphery is slightly trimmed and the resolution looks slightly lowered.)
When [Distortion correction] is set to [Enable], the maximum burst
(p.161) during continuous shooting will decrease.
During movie shooting, [Distortion correction] will not be displayed
(correction is not possible).
If distortion correction is set for Live View shooting, the image corners
may look slightly different.
When you magnify the image during Live View shooting, distortion
correction is not applied to the image displayed. Therefore, if the image
periphery is magnified, a part of the image range that will not be recorded
in the actual image may be displayed.
Images with distortion correction will not have the Dust Delete Data
(p.403) appended. Also, the AF point(s) will not be displayed (p.351) for
image playback.
Depending on shooting conditions, noise may be intensified with the
effects of correction.
The higher the ISO speed, the lower the correction amount will be.
For movie shooting, [Diffraction correction] will not appear (diffraction
correction not possible).
With “Diffraction correction”, the deterioration of resolution affected by the
low-pass filter, etc. is as well corrected besides the diffraction phenomenon.
Therefore, it is effective even at an aperture close to the open aperture.