User Manual
Table Of Contents
- EOS-1D X Mark II
- Introduction
- Getting Started
- Charging the Battery
- Installing and Removing the Battery
- Installing and Removing the Card
- Turning on the Power
- Setting the Date, Time, and Zone
- Selecting the Interface Language
- Attaching and Detaching a Lens
- Basic Operation
- Quick Control for Shooting Functions
- Menu Operations
- Before You Start
- Displaying the Grid in the Viewfinder
- Displaying the Electronic Level
- Setting the Viewfinder Information Display
- Help
- Setting the AF and Drive Modes
- Image Settings
- Selecting the Card for Recording and Playback
- Setting the Image-Recording Quality
- Setting the ISO Speed for Still Photos
- Selecting a Picture Style
- Customizing a Picture Style
- Registering a Picture Style
- Setting the White Balance
- Custom White Balance
- Setting the Color Temperature
- White Balance Correction
- Auto Correction of Brightness and Contrast
- Setting Noise Reduction
- Highlight Tone Priority
- Correction of Lens Aberrations
- Reducing Flicker
- Setting the Color Space
- Creating and Selecting a Folder
- Changing the File Name
- File Numbering Methods
- Setting Copyright Information
- GPS Settings
- Exposure Control for Photographic Expressions
- Flash Photography
- Shooting with the LCD Monitor (Live View Shooting)
- Shooting Movies
- Image Playback
- Image Playback
- INFO. Shooting Information Display
- Searching for Images Quickly
- Magnifying Images
- Rotating the Image
- Protecting Images
- Setting Ratings
- Recording and Playing back Voice Memos
- Quick Control for Playback
- Enjoying Movies
- Playing Back Movies
- Editing a Movie’s First and Last Scenes
- Grabbing a Frame from 4K Movies
- Slide Show (Auto Playback)
- Viewing Images on a TV Set
- Copying Images
- Erasing Images
- Changing Image Playback Settings
- Post-Processing Images
- Sensor Cleaning
- Transferring Images to a Computer and Print Ordering
- Customizing the Camera
- Reference
- Software Overview
223
Logging the Route Traveled
Geotag information for the route the camera travels is recorded at the
intervals set with [Position update intvl] (p.220). The log data is saved
in the camera’s internal memory by date. The table below shows how
many days’ worth of data can be saved.
Log Data Capacity by Positioning Interval (Approx.)
* Based on 1 day equivalent to eight hours worth of log data.
The log data saved in the internal memory can be transferred as a
log file to a card (p.224).
Log file names consist of the date and number (e.g. 16031800). A
log file is created for each day. If the time zone changes (p.55), a
new log file will be created.
If the camera’s internal memory becomes full, the oldest log data will
be erased, and the newest log data will be saved.
When [GPS] is set to [Mode 1], the camera will continue to receive GPS
signals at regular intervals even after the camera’s power switch is set
to <2>. If [Mode 2] is set, the camera will continue to receive GPS
signals at regular intervals even during auto power off. The battery will
thereby drain faster and the number of possible shots will decrease.
Additionally, when [Log GPS position] is set to [Enable], shorter
update intervals will drain the battery more quickly.
When you are not traveling or when GPS signals are weak, setting
[GPS] to [Disable] is recommended.
Geotag Information Logs
Update Interval Log Data Update Interval Log Data
Every 1 sec. 4.1 days Every 30 sec. 100 days
Every 5 sec. 20 days Every 1 min. 100 days
Every 10 sec. 41 days Every 2 min. 100 days
Every 15 sec. 61 days Every 5 min. 100 days
Battery Consumption During Logging