User Manual
Table Of Contents
- EOS-1D X Mark II
- Introduction
- Getting Started
- Charging the Battery
- Installing and Removing the Battery
- Installing and Removing the Card
- Turning on the Power
- Setting the Date, Time, and Zone
- Selecting the Interface Language
- Attaching and Detaching a Lens
- Basic Operation
- Quick Control for Shooting Functions
- Menu Operations
- Before You Start
- Displaying the Grid in the Viewfinder
- Displaying the Electronic Level
- Setting the Viewfinder Information Display
- Help
- Setting the AF and Drive Modes
- Image Settings
- Selecting the Card for Recording and Playback
- Setting the Image-Recording Quality
- Setting the ISO Speed for Still Photos
- Selecting a Picture Style
- Customizing a Picture Style
- Registering a Picture Style
- Setting the White Balance
- Custom White Balance
- Setting the Color Temperature
- White Balance Correction
- Auto Correction of Brightness and Contrast
- Setting Noise Reduction
- Highlight Tone Priority
- Correction of Lens Aberrations
- Reducing Flicker
- Setting the Color Space
- Creating and Selecting a Folder
- Changing the File Name
- File Numbering Methods
- Setting Copyright Information
- GPS Settings
- Exposure Control for Photographic Expressions
- Flash Photography
- Shooting with the LCD Monitor (Live View Shooting)
- Shooting Movies
- Image Playback
- Image Playback
- INFO. Shooting Information Display
- Searching for Images Quickly
- Magnifying Images
- Rotating the Image
- Protecting Images
- Setting Ratings
- Recording and Playing back Voice Memos
- Quick Control for Playback
- Enjoying Movies
- Playing Back Movies
- Editing a Movie’s First and Last Scenes
- Grabbing a Frame from 4K Movies
- Slide Show (Auto Playback)
- Viewing Images on a TV Set
- Copying Images
- Erasing Images
- Changing Image Playback Settings
- Post-Processing Images
- Sensor Cleaning
- Transferring Images to a Computer and Print Ordering
- Customizing the Camera
- Reference
- Software Overview
42
1
Connect the charger to a power outlet.
Connect the power cord to the
charger and insert the power plug into
a power outlet.
When no battery is attached, all the
indicator lamps will be off.
2
Remove the protective cover.
As shown in the illustration, detach
the charger’s protective cover
(provided) and the battery’s
protective cover (provided).
3
Recharge the battery.
Slide the battery into the charger’s
slot as shown by the arrow, and make
sure it is securely attached.
You can attach the battery to either
slot or slot .
X Charging will start and the charge
lamp will blink or light up in green.
X When all three charge lamps light
up in green (50%/80%/100%), the
charging is complete.
To recharge a fully exhausted battery at room temperature (23
°
C/
73
°
F), it takes approx. 2 hr. 50 min. for the LP-E19 and approx. 2
hr. 20 min. for the LP-E4N/LP-E4.
(The battery recharge time varies
widely depending on the ambient temperature and the battery’s
remaining capacity.)
For safety reasons, recharging in low temperatures (5°C - 10°C /
41°F - 50°F) will take a longer time (up to approx. 5 hours only when
charging Battery Pack LP-E19).
Charging the Battery
If two batteries are attached to the charger, the battery attached first will
be charged first, then the other battery will be charged.
Provided Battery Charger LC-E19 can also charge Battery Pack LP-E4N/LP-E4.