User Manual
Table Of Contents
- EOS-1D X Mark II
- Introduction
- Getting Started
- Charging the Battery
- Installing and Removing the Battery
- Installing and Removing the Card
- Turning on the Power
- Setting the Date, Time, and Zone
- Selecting the Interface Language
- Attaching and Detaching a Lens
- Basic Operation
- Quick Control for Shooting Functions
- Menu Operations
- Before You Start
- Displaying the Grid in the Viewfinder
- Displaying the Electronic Level
- Setting the Viewfinder Information Display
- Help
- Setting the AF and Drive Modes
- Image Settings
- Selecting the Card for Recording and Playback
- Setting the Image-Recording Quality
- Setting the ISO Speed for Still Photos
- Selecting a Picture Style
- Customizing a Picture Style
- Registering a Picture Style
- Setting the White Balance
- Custom White Balance
- Setting the Color Temperature
- White Balance Correction
- Auto Correction of Brightness and Contrast
- Setting Noise Reduction
- Highlight Tone Priority
- Correction of Lens Aberrations
- Reducing Flicker
- Setting the Color Space
- Creating and Selecting a Folder
- Changing the File Name
- File Numbering Methods
- Setting Copyright Information
- GPS Settings
- Exposure Control for Photographic Expressions
- Flash Photography
- Shooting with the LCD Monitor (Live View Shooting)
- Shooting Movies
- Image Playback
- Image Playback
- INFO. Shooting Information Display
- Searching for Images Quickly
- Magnifying Images
- Rotating the Image
- Protecting Images
- Setting Ratings
- Recording and Playing back Voice Memos
- Quick Control for Playback
- Enjoying Movies
- Playing Back Movies
- Editing a Movie’s First and Last Scenes
- Grabbing a Frame from 4K Movies
- Slide Show (Auto Playback)
- Viewing Images on a TV Set
- Copying Images
- Erasing Images
- Changing Image Playback Settings
- Post-Processing Images
- Sensor Cleaning
- Transferring Images to a Computer and Print Ordering
- Customizing the Camera
- Reference
- Software Overview
451
7 Custom Controls
During metering, you can select an AF point directly with the <5> or
<9> dial without pressing the <S> button.
*5: With the Quick Control Dial setting screen
displayed, you can press the <B> button, then
set the direction for switching the AF point for when
the <5> dial is turned. The [Direction: AF point
switching] settings for [Horizontal] and [Vertical]
will work for Single-point Spot AF, Single-point AF,
Man. select.: AF point expansion, and Expand AF
area: Surround. The [Direction: Zone AF frame
switch] settings for [Cycle through the zones],
[Horizontal], and [Vertical] will work with Zone AF.
*6: On the Multi-controller setting screen, press the <B> button and you can select
the AF point ([Switch to center AF point] or [Switch to registered AF point]) the
camera will switches to when you press the center of <9>. To register the AF point,
see page 448.
During metering, you can select an AF point directly with <5> without
pressing the <S> button. When this function is set, the functions of the
<O> and <S> buttons will be switched between them. By holding
down the <S> button and turning the <6> dial, you can set the
exposure compensation or aperture.
*7: With the setting screen displayed, you can press the <B> button, then set the
direction for switching the AF point for when the <5> dial is turned. The [Direction:
AF point switching] settings for [Horizontal] and [Vertical] will work for Single-point
Spot AF, Single-point AF, Man. select.: AF point expansion, and Expand AF area:
Surround. The [Direction: Zone AF frame switch] settings for [Cycle through the
zones], [Horizontal], and [Vertical] will work with Zone AF.
: Direct AF point selection
: Select AF point O z S ( during metering)