User Manual

Table Of Contents

7 Custom Controls

456

Pressing the button assigned to this function will stop down the lens

aperture so you can check the depth of field (p.235).

If you press the button assigned to this function when the lens’s IS

switch is set to <1>, the lens’s Image Stabilizer will operate.

Press <0> to display the menu on the LCD monitor.

You can manually set the main shooting functions, such as the shutter

speed, aperture, ISO speed, metering mode, and AF area selection

mode, and can register them to the camera. Only while you hold down

the button assigned to this function, you can recall and use the

registered shooting function settings to take a pictue.

9: With the setting screen displayed, press the

<B> button to display the detailed settings.

Turn the <5> or <6> dial to select the function

to be registered, then press <0> to add a

checkmark [X] to it. When you select a function

and press <0>, you can adjust the setting. By

pressing the <L> button, you can revert the

settings to their defaults.

By selecting [Register current settings], the

camera’s current settings will be registered. To

: Depth-of-field preview

: IS start

: Menu display

: Register/recall shooting function