User Manual
Table Of Contents
- EOS-1D X Mark II
- Introduction
- Getting Started
- Charging the Battery
- Installing and Removing the Battery
- Installing and Removing the Card
- Turning on the Power
- Setting the Date, Time, and Zone
- Selecting the Interface Language
- Attaching and Detaching a Lens
- Basic Operation
- Quick Control for Shooting Functions
- Menu Operations
- Before You Start
- Displaying the Grid in the Viewfinder
- Displaying the Electronic Level
- Setting the Viewfinder Information Display
- Help
- Setting the AF and Drive Modes
- Image Settings
- Selecting the Card for Recording and Playback
- Setting the Image-Recording Quality
- Setting the ISO Speed for Still Photos
- Selecting a Picture Style
- Customizing a Picture Style
- Registering a Picture Style
- Setting the White Balance
- Custom White Balance
- Setting the Color Temperature
- White Balance Correction
- Auto Correction of Brightness and Contrast
- Setting Noise Reduction
- Highlight Tone Priority
- Correction of Lens Aberrations
- Reducing Flicker
- Setting the Color Space
- Creating and Selecting a Folder
- Changing the File Name
- File Numbering Methods
- Setting Copyright Information
- GPS Settings
- Exposure Control for Photographic Expressions
- Flash Photography
- Shooting with the LCD Monitor (Live View Shooting)
- Shooting Movies
- Image Playback
- Image Playback
- INFO. Shooting Information Display
- Searching for Images Quickly
- Magnifying Images
- Rotating the Image
- Protecting Images
- Setting Ratings
- Recording and Playing back Voice Memos
- Quick Control for Playback
- Enjoying Movies
- Playing Back Movies
- Editing a Movie’s First and Last Scenes
- Grabbing a Frame from 4K Movies
- Slide Show (Auto Playback)
- Viewing Images on a TV Set
- Copying Images
- Erasing Images
- Changing Image Playback Settings
- Post-Processing Images
- Sensor Cleaning
- Transferring Images to a Computer and Print Ordering
- Customizing the Camera
- Reference
- Software Overview
Installing and Removing the Card
50
3
Close the cover.
Press the cover until it snaps shut.
4
Set the power switch to <
1
>
(p.53)
.
X The number of possible shots will be
displayed on the top LCD panel.
X The rear LCD panel will indicate
which card(s) has been installed.
The images will be recorded to the
card indicated by the arrow < >
icon.
CF card indicator
CFast card indicator
Card selection icon
Possible shots
The camera cannot use Type II CF cards or hard disk cards.
Ultra DMA (UDMA) CF cards can also be used with the camera. UDMA
cards enable faster data writing.
The number of possible shots varies depending on the remaining
capacity of the card, image-recording quality, ISO speed, etc.
Even if the actual number of possible shots is 2000 or higher, “1999” will
be displayed on the top LCD panel.
Setting [z3: Release shutter without card] to [Disable] will prevent
you from forgetting to insert a card (p.491).