Owners manual

To exit ink tank replacement, tap Next until Exit is displayed.
The print head holder moves to the standby position. The ink tanks cannot be removed from this
position.
Important
•
Printing is not possible without a complete set of ink tanks installed. Install all ink tanks.
• Installed ink tanks cannot be removed until a replacement message appears.
7.
Close the front cover.
After ink tank replacement, the machine starts mixing the ink automatically. Wait until this noise stops.
(Mixing takes 1–2 minutes.)
Note
•
Respond to any error messages as needed.
Message Appears
•
If the print head is out of alignment, as when parallel lines are not printed parallel, align the print
head.
•
The machine may make a noise during these operations, but this does not indicate a problem.
200