User's Manual

Table Of Contents

Adjusting Main Camera Functions with the Joystick

Using only the joystick, you can adjust the following main camera functions. Note that some of the

functions cannot be adjusted manually when the camera mode is set to [Auto].

This section will explain the basics of how to adjust the functions. For specific details, refer to each

function's section.

1 Set the camera mode to a mode other than [Auto] (A 34).

2 Close the menu and then press SET.

• One of the adjustable settings will be highlighted in orange on the screen.

• The display will return to normal if no operation is performed for about 6 seconds.

3 Push the joystick left/right to select the function you want to adjust.

4 Push the joystick up/down to select the desired option and then press SET.

• The desired option will be set and the display will return to normal.

NOTES

• The camera will automatically end the direct setting mode in the following cases.

- If no operation was performed for more than 6 seconds.

- If the MENU button or CANCEL button was pressed.

• Camera mode (A 34)

•Aperture (A 36)

•Gain (A 39)

• Shutter speed (A 40)

• ND filter (A 41)

• White balance (A 42)