User's Manual
Table Of Contents
- Table of Contents
- Introduction
- Preparations
- Shooting Video and Shooting Functions
- Shooting Video
- Video Configuration: System Frequency, Frame Rate and Resolution
- Setting the Camera Mode
- Adjusting Main Camera Functions with the Joystick
- Adjusting the Aperture
- Gain
- Shutter Speed
- ND Filter
- White Balance
- Adjusting the Focus
- Aspect Markers
- Infrared Mode
- Using the Optional RC-V100 Remote Controller
- Customization
- External Connections
- Additional Information
Menu Options
71
[Other Functions] menu
[Rec Command] [Activate] [On], [Off]
When this setting is set to [On], you can use an assignable button set to
[External Rec] or an optional RC-V100 Remote Controller to output a recording
command to an external recorder connected to the camera to start or stop
recording (A 63).
[Remove OSD] [On], [Off]
When this setting is set to [On], the camera's onscreen displays will be turned
off automatically while a recording command is being output.
Menu item Submenu / Setting options
[Reset] [All Settings] [Cancel], [OK]
Resets all the camera's settings to default settings, except for the hour meters
displayed in the [Other Functions] > [Reset Hour Meter] submenu.
[Camera Settings] [Cancel], [OK]
Resets the white balance, iris, gain, shutter speed, ND filter, custom picture,
focus limit and other shooting-related settings to default settings.
[Time Zone] List of world time zones. [UTC-05:00 New York] or [UTC+01:00 Central Europe]
Sets the time zone for the camera's clock. The default value depends on the
country/region of purchase.
[Set Clock] [Date/Time] –
Sets the date and time for the camera's clock (A 20).
[Date Format] [YMD], [YMD/24H], [MDY], [MDY/24H], [DMY], [DMY/24H]
Sets the date format and time format for the camera's clock. The default value
depends on the country/region of purchase.
[REMOTE B Term.] [RC-V100], [NU Protocol]
To use the REMOTE B terminal on the optional RC-V100 Remote Controller,
select [RC-V100]. [NU Protocol] refers to a Canon proprietary communication
protocol that makes connecting to certain accessories possible.
[Assignable Buttons] [1] to [4 (Remote)] [(NONE)], [One-Shot AF], [Push Auto Iris], [ABB] ([3]), [AE Shift
+], [AE Shift -], [Color Bars] ([1]), [Aspect Marker], [Set WB]
([2]), [Tele-converter], [Infrared] ([4 (Remote)]), [External
Rec], [Custom Picture], [Camera Mode]
Allows you to assign a function to an assignable button. The number in
parentheses above indicates the assignable button to which the default setting
in bold next to it is assigned (A 54). Assignable button 4 is located on the
optional RC-V100 Remote Controller but the button's function can be
assigned without connecting the RC-V100 to the camera.
Menu item Submenu / Setting options