User Manual- for Camera

121
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Before Use
Index
Basic Guide
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
P Mode
Tv, Av, M, and C Mode
Playback Mode
Choosing Images Individually
1
Choose [Select].
z Following the procedure in “Using the
Menu” (
=
121), choose [Select] and
press the [ ] button.
2
Choose an image.
z Press the [ ][ ] buttons or turn the [ ]
dial to choose an image, and then press
the [ ] button. [ ] is displayed.
z To cancel selection, press the [
] button
again. [ ] is no longer displayed.
z Repeat this process to specify other
images.
3
Protect the image.
z Press the [ ] button. A conrmation
message is displayed.
z Press the [
][ ] buttons or turn the [ ]
dial to choose [OK], and then press the
[ ] button.
● Images will not be protected if you switch to Shooting mode or
turn the camera off before nishing the setup process in step 3.
● You can also select or clear images by touching the screen in
step 2, and you can access the conrmation screen by touching
[
].
● You can also protect images by touching [OK] on the screen in
step 3.
Protecting Images
Still Images Movies
Protect important images to prevent accidental erasure (
=
123).
z Press the [
] button, choose [ ] in
the menu, and then choose [ ] (either
press the [ ][ ] buttons or turn the [ ]
dial). [ ] is displayed.
z To cancel protection, choose [OFF]. [
]
is no longer displayed.
● Protected images on a memory card will be erased if you format
the card (
=
169).
● Protected images cannot be erased using the camera’s erasure
function. To erase them this way, rst cancel protection.
Using the Menu
1
Access the setting screen.
z Press the [ ] button and choose
[Protect] on the [ 1] tab (
=
30).
2
Choose a selection method.
z Choose an option as desired (
=
30).
z To return to the menu screen, press the
[
] button.