Before Use Basic Guide Advanced Guide Camera User Guide ●● Make sure you read this guide, including the “Safety Precautions” (= 11) section, before using the camera. ●● Reading this guide will help you learn to use the camera properly. ●● Store this guide safely so that you can use it in the future. 1 2 3 4 5 6 7 8 9 ENGLISH ●● Click the buttons in the lower right to access other pages.
Compatible Memory Cards Before Use The following memory cards (commercially available) can be used, regardless of capacity. ●● SD memory cards* Before Use Basic Guide Advanced Guide 1 2 3 4 5 6 7 8 9 ●● SDHC memory cards* Initial Information ●● SDXC memory cards* Package Contents * Cards conforming to SD standards. However, not all memory cards have been verified to work with the camera. Before use, make sure the following items are included in the package.
Preliminary Notes and Legal Information ●● Take and review some test shots initially to make sure the images were recorded correctly. Please note that Canon Inc., its subsidiaries and affiliates, and its distributors are not liable for any consequential damages arising from any malfunction of a camera or accessory, including memory cards, that result in the failure of an image to be recorded or to be recorded in a way that is machine readable. ●● Images recorded by the camera shall be for personal use.
Before Use Part Names (1) (2) (3) (4) Basic Guide (5) (1) (2) (3) (5) (6) Advanced Guide 1 2 3 4 5 6 7 8 9 (7) (3) (8) (8) (6) (9) (10) (11) (9) (10) (12) (4) (7) (1) Zoom lever Shoot Only: [ [ Playback: [ [ (telephoto)] / (wide angle)] (magnify)] / (index)] (14) (15) (5) Flash (1) Speaker (6) Lamp (2) Microphone (7) Lens (3) AV OUT (Audio/video output) / DIGITAL terminal (10) FUNC.
Table of Contents Advanced Guide 1 Before Use Power-Saving Features (Auto Power Down)..............................23 Power Saving in Shooting Mode............................................23 Power Saving in Playback Mode............................................23 Initial Information............................................................... 2 Package Contents..................................................................... 2 Compatible Memory Cards..........................................
Changing the Aspect Ratio.........................................................37 Changing Image Resolution (Size).............................................37 Guidelines for Choosing Resolution Based on Paper Size (for 4:3 Images)..............................................................37 Changing Movie Image Quality..................................................38 Changing the Metering Method..................................................50 Changing the ISO Speed..........................
Changing Image Color Tones (My Colors).................................75 Correcting Image Brightness (i-Contrast)...................................75 Correcting Red-Eye....................................................................76 Switching Display Modes............................................................63 Overexposure Warning (for Image Highlights).......................63 Histogram...............................................................................63 GPS Information Display.
Image Sending Options........................................................... 97 Using Eco Mode.......................................................................108 Power-Saving Adjustment........................................................108 Screen Brightness....................................................................109 Hiding the Start-Up Screen.......................................................109 Formatting Memory Cards........................................................
Cropping Images before Printing..........................................120 Choosing Paper Size and Layout before Printing................121 Available Layout Options......................................................121 Printing ID Photos................................................................121 Printing Movie Scenes..............................................................122 Movie Printing Options.........................................................
Common Camera Operations Shoot ●● While adjusting image settings (Live View Control) -- = 42 Before Use ●● Focus on faces -- = 28, = 43, = 56 Basic Guide ●● Without using the flash (Flash Off) -- = 28 ●● Use camera-determined settings (Auto Mode) -- = 28 Advanced Guide 1 2 3 4 5 6 7 8 9 ●● Include yourself in the shot (Self-Timer) -- = 34, = 47 Shooting people well ●● Add a date stamp -- = 35 View Portraits (= 43) ●● View images (Playback Mode) -- = 61 ●● Automatic playback (Slideshow) -- = 66
Shoot/View Movies ●● Shoot movies -- = 28 ●● View movies (Playback Mode) -- = 61 Print ●● Print pictures -- = 119 Save ●● Save images to a computer -- = 117 Use Wi-Fi Functions ●● Send images to a smartphone -- = 79 ●● Share images online -- = 90 ●● Send images to a computer -- = 85 Safety Precautions ●● Before using the product, ensure that you read the safety precautions described below. Always ensure that the product is used correctly.
●● Avoid contact with liquid, and do not allow liquid or foreign objects inside. This could result in electrical shock or fire. If the product gets wet, or if liquid or foreign objects get inside, remove the battery pack/batteries or unplug immediately. ●● Turn the camera off in places where camera use is prohibited. The electromagnetic waves emitted by the camera may interfere with the operation of electronic instruments and other devices.
●● The slideshow transition effects may cause discomfort when viewed for prolonged periods. ●● When using optional lenses, lens filters, or filter adapters (if applicable), be sure to attach these accessories firmly. If the lens accessory becomes loose and falls off, it may crack, and the shards of glass may lead to cuts. ●● On products that raise and lower the flash automatically, make sure to avoid pinching your fingers with the lowering flash. This could result in injury.
Basic Guide Initial Preparations Prepare for shooting as follows. Before Use Basic Guide Advanced Guide Attaching Accessories Basic Operations Basic information and instructions, from initial preparations to shooting and playback 1 (2) (1) 1 2 3 4 5 6 7 8 9 Attach the strap. ●● Thread the end of the strap through the strap mount (1), and then pull the other end of the strap through the loop on the threaded end (2). 2 Attach the lens cap.
(1) Holding the Camera ●● Place the strap around your wrist. ●● When shooting, keep your arms close to your body and hold the camera securely to prevent it from moving. If you have raised the flash, do not rest your fingers on it. Charging the Battery Pack Before use, charge the battery pack with the included charger. Be sure to charge the battery pack initially, because the camera is not sold with the battery pack charged.
●● Make sure the memory card is facing the right way when you insert it. Inserting memory cards facing the wrong way may damage the camera. Inserting the Battery Pack and Your Memory Card (Commercially Available) Insert the included battery pack and a memory card (commercially available). Note that before using a memory card that is new or has been formatted in another device, you should format the memory card with this camera (= 109). 1 (2 ) Open the cover. ●● Slide the cover (1) and open it (2).
Setting the Date and Time Set the current date and time correctly as follows if the [Date/Time] screen is displayed when you turn the camera on. Information you specify this way is recorded in image properties when you shoot, and it is used when you manage images by shooting date or print images showing the date. You can also add a date stamp to shots, if you wish (= 35).
●● There is a build-in date/time battery (backup battery) in the camera. Date/time settings can be retained for about 3 weeks after the battery pack is removed. ●● The date/time battery will be charged in about 4 hours once you insert a charged battery pack, even if the camera is left off. ●● Once the date/time battery is depleted, the [Date/Time] screen will be displayed when you turn the camera on. Set the correct date and time as described in “Setting the Date and Time” (= 17).
3 Trying the Camera Out Still Images Movies Follow these instructions to turn the camera on, shoot still images or movies, and then view them. Shooting (Smart Auto) Turn the camera on. ●● Press the power button. ●● The startup screen is displayed. 2 Before Use Basic Guide Advanced Guide 4 Shoot. Shooting Still Images 1 2 3 4 5 6 7 8 9 1) Focus. For fully automatic selection of the optimal settings for specific scenes, simply let the camera determine the subject and shooting conditions.
2) Shoot. ●● Press the shutter button all the way down. ●● As the camera shoots, a shutter sound is played, and in low-light conditions when you have raised the flash, it fires automatically. ●● Keep the camera still until the shutter sound ends. ●● After displaying your shot, the camera will revert to the shooting screen. Recording Movies 1) Start recording. (1) Before Use Viewing After shooting images or movies, you can view them on the screen as follows.
3 Play movies. ●● Press the [ ] button, press the [ ][ ] buttons to choose [ ], and then press the [ ] button again. ●● Playback now begins, and after the movie ] is displayed is finished, [ ●● To adjust the volume, press the [ buttons. ][ ●● You can choose multiple images to erase at once (= 70). Before Use Basic Guide Advanced Guide 1 2 3 4 5 6 7 8 9 ] ●● To switch to Shooting mode from Playback mode, press the shutter button halfway.
Advanced Guide 1 Camera Basics Other basic operations and more ways to enjoy your camera, including shooting and playback options Before Use On/Off Basic Guide Shooting Mode Advanced Guide ●● Press the power button to turn the camera on and prepare for shooting. 1 2 3 4 5 6 7 8 9 ●● To turn the camera off, press the power button again. Playback Mode ●● Press the [ ] button to turn the camera on and view your shots. ●● To turn the camera off, press the [ button again.
Power-Saving Features (Auto Power Down) As a way to conserve battery power, the camera automatically deactivates the screen (Display Off) and then turns itself off after a specific period of inactivity. Power Saving in Shooting Mode The screen is automatically deactivated after about one minute of inactivity. In about two more minutes, the lens is retracted and the camera turns itself off.
Shooting Display Options Press the [ ] button to view other information on the screen, or to hide the information. For details on the information displayed, see “On-Screen Information” (= 132). Before Use Using the FUNC. Menu Configure commonly used functions through the FUNC. menu as follows. Note that menu items and options vary depending on the shooting mode (= 135) or playback mode (= 140). 1 Basic Guide Advanced Guide 1 2 3 4 5 6 7 8 9 Access the FUNC. menu. ●● Press the [ ] button.
4 Finish the setup process. ●● Press the [ ] button. ●● The screen before you pressed the [ ] button in step 1 is displayed again, showing the option you configured. ●● To undo any accidental setting changes, you can restore the camera’s default settings (= 112). Before Use Using the Menu Screen Configure a variety of camera functions through the menu screen as follows. Menu items are grouped by purpose on tabs, such as shooting [ ], playback [ ], and so on.
4 Choose an option. ●● Press the [ ][ ] buttons to choose an option. 5 Finish the setup process. ●● Press the [ ] button to return to the screen displayed before you pressed the [ ] button in step 1. Before Use On-Screen Keyboard Use the on-screen keyboard to enter information for Wi-Fi connections (= 78). Note that the length and type of information you can enter varies depending on the function you are using.
Indicator Display When the following conditions occur, the camera’s indicator (= 4) blinks green. -- Connecting to a computer (= 117) -- Display off (= 23, = 108, = 108) -- Starting up, recording/reading a memory card -- Any kind of connecting -- When shooting in Long Shutter mode (= 47) -- Connecting to Wi-Fi/Receiving data Before Use Clock Basic Guide You can check the current time. ●● Press and hold the [ ] button. Advanced Guide ●● The current time appears.
2 Auto Mode Shooting with Camera-Determined Settings For fully automatic selection of the optimal settings for specific scenes, simply let the camera determine the subject and shooting conditions. Before Use Basic Guide Advanced Guide 1 2 3 4 5 6 7 8 9 Shooting (Smart Auto) Convenient mode for easy shots with greater control over shooting Still Images 1 Movies Turn the camera on. ●● Press the power button. ●● The startup screen is displayed. 2 Enter [ ] mode.
3 (1) Compose the shot. 2) Shoot. ●● To zoom in and enlarge the subject, move the zoom lever toward [ ] (telephoto), and to zoom away from the subject, move it toward [ ] (wide angle). (A zoom bar (1) showing the zoom position is displayed.) ●● Press the shutter button all the way down. ●● To zoom in or out quickly, move the zoom lever all the way toward [ ] (telephoto) or [ ] (wide angle), and to zoom in or out slowly, move it just a little in the desired direction.
●● When you recompose shots, the focus, brightness, and colors will be automatically adjusted. 3) Finish recording. ●● Press the movie button again to stop recording. The camera beeps twice as recording stops. ●● Recording will stop automatically when the memory card becomes full. Still Images/Movies ●● If the camera is turned on while the [ ] button is held down, the camera will no longer sound.
Movies Before Use Scene Icons ●● Before shooting a movie, lower the flash with your finger. Be careful not to touch the microphone (1) when shooting a movie. Leaving the flash raised, or blocking the microphone may prevent audio from being recorded or may cause the recording to sound muffled. (1) ●● Avoid touching camera controls other than the movie button when shooting movies, because sounds made by the camera will be recorded.
When Shooting Other Subjects Background Other Subjects In Motion*1 At Close Range Bright Icon Background Color Gray Bright and Backlit With Blue Sky Light Blue Blue Sky and Backlit Sunsets – Orange Spotlights Dark Dark Blue Dark, Using Tripod *1 *2 * 2 – – Not displayed for movies. Displayed in dark scenes when the camera is held still, as when mounted on a tripod.
On-Screen Frames Before Use Common, Convenient Features Still Images Movies A variety of frames are displayed once the camera detects subjects you are aiming the camera at. ●● A white frame is displayed around the subject (or person’s face) determined by the camera to be the main subject, and gray frames are displayed around other detected faces. Frames follow moving subjects within a certain range to keep them in focus.
●● Moving the zoom lever will display the zoom bar (which indicates the zoom position). The color of the zoom bar will change depending on the zoom range. -- White range: optical zoom range where the image will not appear grainy. -- Yellow range: digital zoom range where the image is not noticeably grainy (ZoomPlus). -- Blue range: digital zoom range where the image will appear grainy.
Customizing the Self-Timer Still Images Movies Before Use Adding a Date Stamp You can specify the delay (0 – 30 seconds) and number of shots (1 – 10). 1 Choose [ ]. ●● Following step 1 in “Using the Self-Timer” (= 34), choose [ ] and press the [ ] button immediately. 2 Configure the setting. Still Images Movies The camera can add the shooting date to images, in the lower-right corner.
●● Shots taken without adding a date stamp can be printed with one as follows. However, adding a date stamp this way to images that already have one may cause it to be printed twice. -- Print using printer functions (= 119) -- Use camera DPOF print settings (= 123) to print Continuous Shooting Still Images ●● During continuous shooting, focus and exposure are locked at the position/level determined when you pressed the shutter button halfway. ●● Cannot be used with the self-timer (= 34).
Before Use Changing Image Resolution (Size) Image Customization Features Still Images Changing the Aspect Ratio Still Images Movies Movies Choose from 4 levels of image resolution, as follows. For guidelines on how many shots at each recording pixel setting can fit on a memory card, see “Number of Shots per Memory Card” (= 143). Basic Guide Advanced Guide 1 2 3 4 5 6 7 8 9 ●● Press the [ ] button, choose [ ] in the menu, and choose the desired option (= 24).
Changing Movie Image Quality Before Use Helpful Shooting Features Still Images Basic Guide Movies 2 image quality settings are available. For guidelines on the maximum movie length at each level of image quality that will fit on a memory card, see “Recording Time per Memory Card” (= 143). ●● Press the [ ] button, choose [ ] in the menu, and choose the desired option (= 24). ●● The option you configured is now displayed. ●● To restore the original setting, repeat this process but choose [ ].
Magnifying the Area in Focus Still Images Movies You can check the focus by pressing the shutter button halfway, which will enlarge the portion of the image in focus in the AF frame. 1 Before Use Customizing Camera Operation Configure the setting. ●● Press the [ ] button, choose [AFPoint Zoom] on the [ ] tab, and then choose [On] (= 25). Customize shooting functions on the [ ] tab of the menu screen as follows. For instructions on menu functions, see “Using the Menu Screen” (= 25).
Deactivating the Red-Eye Reduction Lamp Still Images Movies A lamp lights up to reduce red-eye when the flash is used in low-light shots. If you prefer, you can deactivate the lamp. 1 Access the [Flash Settings] screen. Still Images Movies You can change how long images are displayed and what information is displayed immediately after shooting.
Changing the Screen Displayed after Shots Change the way images are displayed after shots as follows. 1 Set [Display Time] to [2 sec.], [4 sec.], [8 sec.], or [Hold] (= 40). 2 Configure the setting. Before Use Basic Guide Advanced Guide 1 2 3 4 5 6 7 8 9 ●● Press the [ ][ ] buttons to choose [Display Info]. Press the [ ][ ] buttons to choose the desired option. ●● To restore the original setting, repeat this process but choose [Off]. Off Displays only the image.
3 Other Shooting Modes Before Use Brightness / Color Customization (Live View Control) Still Images Basic Guide Movies Advanced Guide 1 2 3 4 5 6 7 8 9 Image brightness or colors when shooting can be easily customized as follows. 1 Shoot more effectively in various scenes, and take shots enhanced with unique image effects or captured using special functions Enter [ ] mode. ●● Press the [ ] button several times until [ ] is displayed. 2 Configure the setting.
Shooting Fireworks (Fireworks) Specific Scenes Still Images ●● Vivid shots of fireworks. Choose a mode matching the shooting scene, and the camera will automatically configure the settings for optimal shots. 1 Before Use Basic Guide Advanced Guide Choose a shooting mode. ●● Press the [ ] button several times until [ ] is displayed. ] in ●● Press the [ ] button, choose [ the menu, and choose the desired option (= 24).
Shooting with a Fish-Eye Lens Effect (Fish-Eye Effect) Applying Special Effects Add a variety of effects to images when shooting. 1 Still Images Choose a shooting mode. ●● Follow step 1 in “Specific Scenes” (= 43) to choose a shooting mode. 2 Movies Before Use Basic Guide Advanced Guide Shoot with the distorting effect of a fish-eye lens. 1 Choose [ 1 2 3 4 5 6 7 8 9 ]. ●● Follow step 1 in “Specific Scenes” (= 43) and choose [ ]. Shoot.
Playback Speed and Estimated Playback Time (for One-Minute Clips) Shots Resembling Miniature Models (Miniature Effect) Still Images Speed Movies Creates the effect of a miniature model, by blurring image areas above and below your selected area. You can also make movies that look like scenes in miniature models by choosing the playback speed before the movie is recorded. People and objects in the scene will move quickly during playback. Note that sound is not recorded. 1 Choose [ ].
Shooting with a Toy Camera Effect (Toy Camera Effect) Still Images Still Images Movies Choose [ 1 ]. 2 3 Choose a color tone. Shoot. Standard Shots resemble toy camera images. Warm Images have a warmer tone than with [Standard]. Cool Images have a cooler tone than with [Standard]. Advanced Guide ]. 1 2 3 4 5 6 7 8 9 Choose a color tone. ●● Press the [ ] button, press the [ ][ ] buttons to choose a color tone, and then press the [ ] button.
Special Modes for Other Purposes Using the Face Self-Timer Still Images Movies The camera will shoot about two seconds after detecting that the face of another person (such as the photographer) (= 56) has entered the shooting area. This is useful when including yourself in group photos or similar shots. 1 Choose [ ]. ●● Follow step 1 in “Specific Scenes” (= 43) and choose [ ]. 2 Compose the shot and press the shutter button halfway.
2 Choose the shutter speed. ●● Press the [ ] button, press the [ ][ ] buttons to choose the shutter speed, and then press the [ ] button. 3 Check the exposure. Before Use Basic Guide Advanced Guide 1 2 3 4 5 6 7 8 9 ●● Press the shutter button halfway to view the exposure for your selected shutter speed. 4 Shoot. ●● On-screen image brightness in step 3, when you pressed the shutter button halfway, may not match the brightness of your shots. ●● With shutter speeds of 1.
4 P Mode More discerning shots, in your preferred shooting style ●● Instructions in this chapter apply to the camera when set to [ ] mode. ●● [ ]: Program AE; AE: Auto Exposure. ●● Before using a function introduced in this chapter in modes other than [ ], make sure the function is available in that mode (= 134). Shooting in Program AE ([P] Mode) Still Images Movies You can customize many function settings to suit your preferred shooting style.
Before Use Changing the Metering Method Image Brightness (Exposure) Still Images Adjusting Image Brightness (Exposure Compensation) Still Images Movies Movies Adjust the metering method (how brightness is measured) to suit shooting conditions as follows. ●● Press the [ ] button, choose [ ] in the menu, and choose the desired option (= 24). Basic Guide Advanced Guide 1 2 3 4 5 6 7 8 9 ●● The option you configured is now displayed.
Changing the ISO Speed Before Use Correcting Image Brightness (i-Contrast) Still Images Movies When the ISO speed setting is [AUTO], it is set automatically to suit the shooting mode and scene. The higher the value the ISO speed is, the greater the light sensitivity is. The lower the value the ISO speed is, the smaller the light sensitivity is. ●● Press the [ ] button, choose [ ] in the menu, and choose the desired option (= 24). ●● The option you configured is now displayed.
Custom White Balance Image Colors Still Images Movies By adjusting white balance (WB), you can make image colors look more natural for the scene you are shooting. ●● Press the [ ] button, choose [ ] in the menu, and choose the desired option (= 24). ●● The option you configured is now displayed.
– My Colors Off Vivid Neutral Emphasizes contrast and color saturation, making images sharper. Tones down contrast and color saturation for subdued images. Sepia Creates sepia tone images. B/W Creates black and white images. Positive Film Combines the effects of Vivid Blue, Vivid Green, and Vivid Red to produce intense yet natural-looking colors resembling images on positive film. Lighter Skin Tone Lightens skin tones. Darker Skin Tone Darkens skin tones.
Before Use Shooting Distant Subjects (Infinity) Shooting Range and Focusing Still Images To restrict the focus to distant subjects, set the camera to [ on the range of focus, see “Shooting Range” (= 142). Shooting Close-Ups (Macro) Still Images Movies To restrict the focus to subjects at close range, set the camera to [ ]. For details on the range of focus, see “Shooting Range” (= 142). ●● Press the [ ] button, press the [ ][ ] buttons to choose [ ], and then press the [ ] button.
●● The shutter speed may be equivalent when you move the zoom ] for maximum telephoto, and when lever all the way toward [ you zoom in to enlarge the subject to the same size following step 2 in “Zooming In Closer on Subjects (Digital Zoom)” (= 33). Before Use Changing the AF Frame Mode Still Images Movies Change the AF (auto focus) frame mode to suit the shooting conditions as follows.
Face AiAF Choosing Subjects to Focus On (Tracking AF) Still Images Movies ●● Detects people’s faces, and then sets the focus, exposure (evaluative metering only), and white balance ([ ] only). ●● After you aim the camera at the subject, a white frame is displayed around the person’s face determined by the camera to be the main subject, and up to two gray frames are displayed around other detected faces. ●● When the camera detects movement, frames will follow moving subjects, within a certain range.
●● Even after your shot, [ ] is still displayed and the camera continues to track the subject. ●● Focusing may not be possible in some shooting conditions. ●● In low-light conditions, Servo AF may not be activated (AF frames may not turn blue) when you press the shutter button halfway. In this case, the focus and exposure are set according to the specified AF frame mode. ●● If adequate exposure cannot be obtained, the shutter speed and aperture value are displayed in orange.
Flash ●● In [ ] mode, mount the camera on a tripod or take other measures to keep it still and prevent camera shake. Additionally, you should set [IS Mode] to [Off] when using a tripod or other means to secure the camera (= 59). ●● In [ ] mode, even after the flash fires, ensure that the main subject does not move until the shutter sound is finished playing.
Before Use Changing the IS Mode Settings Other Settings Still Images Changing the Compression Ratio (Image Quality) Still Images 1 Access the setting screen. Basic Guide Advanced Guide 1 2 3 4 5 6 7 8 9 ●● Press the [ ] button, choose [IS Settings] on the [ ] tab, and then press the [ ] button (= 25). Movies Choose from two compression ratios, as follows. Choose from [ ] (Super Fine) and [ ] (Fine).
Shooting Movies with Subjects at the Same Size Shown before Shooting Still Images Before Use Movies Normally, once movie recording begins, the image display area changes and subjects are enlarged to allow for correction of significant camera shake. To shoot subjects at the same size shown before shooting, you can choose not to reduce significant camera shake. Basic Guide Advanced Guide 1 2 3 4 5 6 7 8 9 ●● Follow the steps in “Changing the IS Mode Settings” (= 59) to access the [IS Settings] screen.
5 Still Images ] button to ●● It may not be possible to play back or edit images that were renamed or already edited on a computer, or images from other cameras. Basic Guide Advanced Guide 1 2 3 4 5 6 7 8 9 Enter Playback mode. ●● Press the [ Have fun reviewing your shots, and browse or edit them in many ways Movies After shooting images or movies, you can view them on the screen as follows. 1 Playback Mode ●● To prepare the camera for these operations, press the [ enter Playback mode.
●● Movies are identified by a [ To play movies, go to step 3. 3 ] icon. Play movies. ●● To start playback, press the [ ] button, press the [ ][ ] buttons to choose [ ], and then press the [ ] button again. 4 ●● To switch to Shooting mode from Playback mode, press the shutter button halfway. ] tab ●● To deactivate Scroll Display, choose MENU (= 25) > [ > [Scroll Display] > [Off].
Histogram Switching Display Modes Before Use Still Images Still Images Movies Press the [ ] button to view other information on the screen, or to hide the information. For details on the information displayed, see “Playback (Detailed Information Display)” (= 133). No Information Display Movies ●● The graph in detailed information display (= 63) is a histogram showing the distribution of brightness in the image.
Still Images Navigating through Images in an Index Still Images Movies By displaying multiple images in an index, you can quickly find the images you are looking for. 1 Display images in an index. ●● Move the zoom lever toward [ ] to display images in an index. Moving the lever again will increase the number of images shown. ●● To display fewer images, move the zoom lever toward [ ]. Fewer images are shown each time you move the lever. 2 Choose an image. ●● Press the [ an image.
●● To hide or view other information, press the [ ] button in step 2. ●● Options for viewing the images found (in step 2) include “Navigating through Images in an Index” (= 64), “Magnifying Images” (= 65), and “Viewing Slideshows” (= 66).
2 Viewing Slideshows Still Images Movies Automatically play back images from a memory card as follows. Each image is displayed for about three seconds. ●● Press the [ ] button, choose [ ] in the menu, and choose the desired option (= 24). ●● The slideshow will start after [Loading image] is displayed for a few seconds. ●● Press the [ slideshow. Configure the settings. Before Use ●● Choose a menu item to configure, and then choose the desired option (= 25).
2 Choose an image. ●● Press the [ ][ ][ ][ ] buttons to choose the image you want to view next. ●● Your chosen image is displayed in the center, surrounded by the next four candidate images. ●● For full-screen display of the center image, press the [ ] button. To restore the original display, press the [ ] button again. ] button to restore ●● Press the [ single-image display.
3 Using the Menu 1 Access the setting screen. ●● Press the [ ] button and choose [Protect] on the [ ] tab (= 25). Protect the images. Before Use ●● Press the [ ] button. A confirmation message is displayed. Basic Guide ●● Press the [ ][ ] buttons to choose [OK], and then press the [ ] button. Advanced Guide 1 2 3 4 5 6 7 8 9 ●● Images will not be protected if you switch to Shooting mode or turn the camera off before finishing the setup process in step 3. 2 Choose a selection method.
3 Choose an ending image. ●● Press the [ ] button to choose [Last image], and then press the [ ] button. ●● Press the [ ][ ] buttons to choose an image, and then press the [ ] button. ●● Images before the first image cannot be selected as the last image. 4 Protecting All Images at Once Before Use Basic Guide 1 Choose [Protect All Images]. ●● Following step 2 in “Using the Menu” (= 68), choose [Protect All Images] and press the [ ] button. 2 Advanced Guide 1 2 3 4 5 6 7 8 9 Protect the images.
2 Erasing Images Still Images Movies You can choose and erase unneeded images one by one. Be careful when erasing images, because they cannot be recovered. However, protected images (= 67) cannot be erased. 1 Choose an image to erase. ●● Press the [ ][ ] buttons to choose an image. 2 Erase the image. ●● Press the [ ] button. ●● After [Erase?] is displayed, press the [ ][ ] buttons to choose [Erase], and then press the [ ] button. ●● The current image is now erased.
Selecting a Range 1 Choose [Select Range]. ●● Following step 2 in “Choosing a Selection Method” (= 70), choose [Select Range] and press the [ ] button. 2 Still Images 1 Choose images. Advanced Guide 1 2 3 4 5 6 7 8 9 Choose [ ]. Erase the image. 2 Choose [Select All Images]. ●● Following step 2 in “Choosing a Selection Method” (= 70), choose [Select All Images] and press the [ ] button. Erase the image. ●● Press the [ ][ ] buttons to choose [OK], and then press the [ ] button.
2 Rotate the image. ●● Press the [ ][ ] buttons to choose an image. ●● The image is rotated 90° each time you press the [ ] button. ●● To return to the menu screen, press the ] button. [ ●● Rotation is not possible when [Auto Rotate] is set to [Off] (= 72). Still Images Movies You can organize images by tagging them as favorites. By choosing a category in filtered playback, you can restrict the following operations to all of those images.
2 Choose an image. ●● Press the [ ][ ] buttons to choose an image, and then press the [ ] button. [ ] is displayed. ●● To untag the image, press the [ ] button again. [ ] is no longer displayed. Before Use Editing Still Images Basic Guide Advanced Guide ●● Image editing (= 73 – = 76) is only available when the memory card has sufficient free space. 1 2 3 4 5 6 7 8 9 ●● Repeat this process to choose additional images. 3 Configure the setting. ●● Press the [ ] button.
5 (1) Review the new image. (2) (3) 3 Adjust the cropping area. ●● Press the [ ] button. [Display new image?] is displayed. ●● A frame is displayed around the portion of the image to be cropped (1). ●● Press the [ ][ ] buttons to choose [Yes], and then press the [ ] button. ●● The original image is shown in the upper left, and a preview of the image as cropped (2) is shown in the lower right. You can also see the resolution after cropping (3). ●● The saved image is now displayed.
Changing Image Color Tones (My Colors) Still Images Movies You can adjust image colors and then save the edited image as a separate file. For details on each option, see “Changing Image Color Tones (My Colors)” (= 52). 1 Choose [My Colors]. ●● Press the [ ] button, and then choose [My Colors] on the [ ] tab (= 25). 2 Choose an image. ●● Press the [ ][ ] buttons to choose an image, and then press the [ ] button. 3 Choose an option.
Correcting Red-Eye Still Images Movies Automatically corrects images affected by red-eye. You can save the corrected image as a separate file. 1 Before Use Basic Guide Advanced Guide 1 2 3 4 5 6 7 8 9 Choose [Red-Eye Correction]. ●● Press the [ ] button, and then choose [Red-Eye Correction] on the [ tab (= 25). 2 ●● Some images may not be corrected accurately. ●● To overwrite the original image with the corrected image, choose [Overwrite] in step 4. In this case, the original image will be erased.
3 Editing Movies Still Images Movies You can remove unneeded portions from the beginning and end of movies. 1 ] ●● The movie editing panel and editing bar are now displayed. 2 (1) Specify portions to cut. ●● (1) is the movie editing panel, and (2) is the editing bar. ●● Press the [ or [ ]. (2) ][ ] buttons to choose [ Before Use Basic Guide ●● To edit the movie again, repeat step 2. Advanced Guide ●● To cancel editing, press the [ ][ ] buttons to choose [ ].
6 Wi-Fi Functions Send images wirelessly from the camera to a variety of compatible devices, and use the camera with Web services ●● Before using Wi-Fi, be sure to read “Wi-Fi (Wireless LAN) Precautions” (= 147). Available Wi-Fi Features You can send and receive images and control the camera remotely by connecting it to these devices and services via Wi-Fi. Before Use Basic Guide Advanced Guide ●● Smartphones and Tablets Send images to smartphones and tablet computers that have Wi-Fi functions.
Sending Images to a Smartphone There are several ways to connect the camera to a smartphone and send images. ●● Connect via NFC (= 79) Simply touch an NFC-compatible Android smartphone (OS version 4.0 or later) against the camera to connect the devices ●● Use the Wi-Fi menu to connect (= 82) You can connect the camera to a smartphone as you would connect it to a computer or other device. Multiple smartphones can be added.
2 Establish the connection. ●● Make sure the camera is off or in Shooting mode. ●● Touch the N-Mark ( ) on the smartphone with Camera Connect installed against the camera’s N-Mark. ●● The camera starts up automatically. ●● After the [Device Nickname] screen is displayed, press the [ ][ ] buttons to choose [OK], and then press the [ ] button. 4 Send images. ●● Press the [ ][ ][ ][ ] buttons to choose [Select and send], and then press the [ ] button.
●● When using NFC, keep the following points in mind. -- Avoid strong impact between the camera and smartphone. This may damage the devices. -- Depending on the smartphone, the devices may not recognize each other immediately. In this case, try holding the devices together in slightly different positions. If connection is not established, keep the devices together until the camera screen is updated.
4 Adding a Smartphone These steps show how to use the camera as an access point, but you can also use an existing access point (= 84). 1 Choose [Add a Device]. ●● Press the [ ][ ] buttons to choose [Add a Device], and then press the [ ] button. Before Use Basic Guide Advanced Guide Install Camera Connect. ●● For an iPhone and iPad, find Camera Connect in the App Store and download and install the app. 1 2 3 4 5 6 7 8 9 ●● The camera’s SSID and password are displayed.
7 Choose the camera to connect. ●● When the screen for choosing the target camera is displayed on your smartphone, choose the camera to pair them. 8 Adjust the privacy setting. ●● Press the [ ][ ] buttons to choose [Yes], and then press the [ ] button. ●● You can now use the smartphone to browse, import, or geotag images on the camera or shoot remotely. 9 Send images. ●● Press the [ ][ ][ ][ ] buttons to choose [Select and send], and then press the [ ] button.
5 Using Another Access Point ●● Follow steps 8 – 9 in “Adding a Smartphone” (= 82) to configure the privacy settings and send images. When connecting the camera to a smartphone through the Wi-Fi menu, you can also use an existing access point. 1 Prepare for the connection. 3 Basic Guide Advanced Guide 1 2 3 4 5 6 7 8 9 You can reconnect to any previous access points automatically by following step 4 in “Adding a Smartphone” (= 82). Connect the smartphone to the access point.
Saving Images to a Computer Preparing to Register a Computer For detailed system requirements, such as about computers that can connect to the camera and Wi-Fi, and compatibility information, including support in new operating systems, visit the Canon website. ●● Windows 7 Starter and Home Basic editions are not supported. ●● Windows 7 N (European version) and KN (South Korean version) require a separate download and installation of Windows Media Feature Pack. For details, check the following website.
2 Configure the setting. ●● Click in the following order: [Start] menu ► [All Programs] ► [Canon Utilities] ► [CameraWindow] ► [Wi-Fi connection setup]. ●● In the application that opens, follow the on-screen instructions and configure the setting. ●● The following Windows settings are configured when you run the utility in step 2. -- Turn on media streaming This will enable the camera to see (find) the computer to access via Wi-Fi.
●● For information on WPS compatibility and for instructions on checking settings, refer to the access point user manual. ●● A router is a device that creates a network (LAN) structure for connecting multiple computers. A router that contains an internal Wi-Fi function is called a “Wi-Fi router”. ●● This guide refers to all Wi-Fi routers and base stations as “access points”. ●● If you use MAC address filtering on your Wi-Fi network, be sure to add the camera’s MAC address to your access point.
7 Establish the connection. ●● On the access point, hold down the WPS connection button for a few seconds. ●● On the camera, press the [ go to the next step. ] button to ●● The camera connects to the access point and lists devices connected to it on the [Select a Device] screen. 10 ●● Mac OS: CameraWindow is automatically displayed when a Wi-Fi connection is established between the camera and computer. 11 8 Choose the target device.
●● Once you have connected to devices via the Wi-Fi menu, recent destinations will be listed first when you access the Wi-Fi menu. You can easily connect again by pressing the [ ][ ] buttons to choose the device and then pressing the [ ] button. To add a new device, display the device selection screen by pressing the [ ][ ] buttons, and then configure the setting.
Previous Access Points You can reconnect to any previous access points automatically by following step 4 in “Using WPS-Compatible Access Points” (= 87). ●● To reconnect to the access point, confirm that the target device is already connected to it, and then follow the procedure from step 8 in “Using WPS-Compatible Access Points” (= 87).
Registering CANON iMAGE GATEWAY To link the camera and CANON iMAGE GATEWAY, add CANON iMAGE GATEWAY as a destination Web service on the camera. By setting this, an e-mail notification for Camera Web Link Settings will be sent, so you must use the e-mail address that you use on your computer or smartphone. 1 Access the Wi-Fi menu. ●● Press the [ ] button. ●● After the [Device Nickname] screen is displayed, press the [ ][ ] buttons to choose [OK], and then press the [ ] button.
7 Confirm the e-mail notification was sent. ●● When information is sent from CANON iMAGE GATEWAY, an e-mail notification is sent to the e-mail address you entered in step 5. ●● The screen notifying you that the e-mail notification was sent is displayed. Press the [ ] button. ●● The [ 8 ] icon changes to [ ]. Access the URL in the received e-mail notification and set the camera web link. ●● From a computer or smartphone, access the page linked in the notification message.
3 Choose [ ●● Press the [ ]. ] button. ●● Press the [ ][ ][ ][ ] buttons to choose [ ], and then press the [ ] button. ●● The Web service settings are now updated. ●● If any configured settings change, follow these steps again to update the camera settings. Uploading Images to Web Services 1 Access the Wi-Fi menu. ●● Press the [ 2 ] button. Choose the destination. ●● Press the [ ][ ][ ][ ] buttons to choose the icon of the Web service to connect to, and then press the [ ] button.
Printing Images Wirelessly from a Connected Printer Connect the camera to a printer via Wi-Fi to print as follows. These steps show how to use the camera as an access point, but you can also use an existing access point (= 84). 1 Access the Wi-Fi menu. ●● Press the [ 2 Choose [ ] button. Connect the printer to the network. ●● In the printer’s Wi-Fi setting menu, choose the SSID (network name) displayed on the camera to establish a connection.
●● Connections require that a memory card with saved images be in the camera. ●● Once you have connected to devices via the Wi-Fi menu, recent destinations will be listed first when you access the Wi-Fi menu. You can easily connect again by pressing the [ ][ ] buttons to choose the device and then pressing the [ ] button. To add a new device, display the device selection screen by pressing the [ ][ ] buttons, and then configure the setting.
4 Send images. ●● Press the [ ][ ][ ][ ] buttons to choose [Select and send], and then press the [ ] button. ●● Press the [ ][ ] buttons to choose [Select], and then press the [ ] button. ●● Press the [ ][ ][ ][ ] buttons to choose an image to send, press the [ ] button to mark it as selected ([ ]), and then press the [ ] button. ●● Press the [ ][ ] buttons to choose [OK], and then press the [ ] button. ●● Press the [ ][ ][ ][ ] buttons to choose [Send], and then press the [ ] button.
Image Sending Options You can choose multiple images to send at once and change the image resolution (size) before sending. Some Web services also enable you to annotate the images you send. Sending Multiple Images On the image transfer screen, you can select a range of images to send, and send images tagged as favorites. 1 Choose [Select and send]. ●● On the image transfer screen, press the [ ][ ] buttons to choose [Select and send], and then press the [ ] button. 2 Choose a selection method.
Notes on Sending Images ●● Depending on the condition of the network you are using, it may take a long time to send movies. Be sure to keep an eye on the camera battery level. ●● Web services may limit the number of images or length of movies you can send. Choosing the Number of Recording Pixels (Image Size) Before Use On the image transfer screen, choose [ ] by pressing the [ ][ ] buttons, and then press the [ ] button.
Adding Comments Using the camera, you can add comments to images that you send to e-mail addresses, social networking services, etc. The number of characters and symbols that can be entered may differ depending on the Web service. 1 Access the screen for adding comments. ●● On the image transfer screen, choose [ ] by pressing the [ ][ ][ ][ ] buttons, and then press the [ ] button. 2 3 Add a comment (= 26). Send the image.
2 Choose the type of images to send (only when sending movies with images). ●● Press the [ ] button, choose [Wireless settings] on the [ ] tab, and then choose [Wi-Fi Settings] (= 25). Sending Images ●● Press the [ ][ ] buttons to choose [Image Sync], and then press the [ ][ ] buttons to choose [Stills/Movies]. Preparing the Computer Install Image Transfer Utility. 2 Send images. Save the images to the computer. ●● Images are automatically saved to the computer when you turn it on.
●● Even if images were imported to the computer through a different method, any images not sent to the computer via CANON iMAGE GATEWAY will be sent to the computer. ●● Sending is faster when the destination is a computer on the same network as the camera, because images are sent via the access point instead of CANON iMAGE GATEWAY. Note that images stored on the computer are sent to CANON iMAGE GATEWAY, so the computer must be connected to the Internet.
Using a Smartphone to View Camera Images and Control the Camera You can do the following with the dedicated smartphone app Camera Connect. ●● Browse images on the camera and save them to the smartphone ●● Geotag images on the camera (= 102) ●● Shoot remotely (= 102) ●● Privacy settings must be configured in advance to allow image viewing on the smartphone (= 82, = 103).
●● The camera works in [ ] mode during remote shooting. However, some FUNC. and MENU settings you have configured in advance may be changed automatically. ●● Movie shooting is not available. Before Use Editing or Erasing Wi-Fi Settings Basic Guide Edit or erase Wi-Fi settings as follows. Advanced Guide Editing Connection Information ●● Any jerky subject motion shown on the smartphone due to the connection environment will not affect recorded images. ●● No AF frames are displayed.
Connection Configurable Items Web Services [Change Device Nickname] (= 104) O [View Settings] (= 82) – O – – – [Erase Connection Info] (= 104) O O O O – O : Configurable O O O – – : Not configurable Changing the Camera Nickname You can change the nickname of the camera displayed on the connected device. 1 Before Use Basic Guide Advanced Guide Choose [Wireless settings]. 1 2 3 4 5 6 7 8 9 ●● Press the [ ] button and choose [Wireless settings] on the [ ] tab (= 25).
Before Use Returning the Wi-Fi Settings to Default Basic Guide Return the Wi-Fi settings to default if you transfer ownership of the camera to another person, or dispose of it. Resetting the Wi-Fi settings will also clear all Web service settings. Be sure that you want to reset all Wi-Fi settings before using this option. 1 Advanced Guide 1 2 3 4 5 6 7 8 9 Choose [Wireless settings]. ●● Press the [ ] button and choose [Wireless settings] on the [ ] tab (= 25). 2 Choose [Reset Settings].
7 Before Use Adjusting Basic Camera Functions Basic Guide Basic camera functions are configured on the [ ] tab of the MENU (= 25). Customize commonly used functions as desired, for greater convenience. Setting Menu Silencing Camera Operations Customize or adjust basic camera functions for greater convenience Silence camera sounds and movies as follows. Advanced Guide 1 2 3 4 5 6 7 8 9 ●● Choose [Mute], and then choose [On].
Before Use Hiding Hints and Tips World Clock Hints and tips are normally shown when you choose FUNC. (= 24) or MENU (= 25) items. If you prefer, you can deactivate this information. To ensure that your shots will have the correct local date and time when you travel abroad, simply register the destination in advance and switch to that time zone. This convenient feature eliminates the need to change the Date/Time setting manually.
Lens Retraction Timing The lens is normally retracted for safety about one minute after you press the [ ] button in Shooting mode (= 22). To have the lens retracted immediately after you press the [ ] button, set the retraction timing to [0 sec.]. ●● Choose [Lens Retraction], and then choose [0 sec.]. 2 Shoot. ●● To activate the screen and prepare for shooting when the screen is off but the lens is still out, press the shutter button halfway.
Screen Brightness Formatting Memory Cards Adjust screen brightness as follows. Before using a new memory card or a card formatted in another device, you should format the card with this camera. Formatting erases all data on a memory card. Before formatting, copy images on the memory card to a computer, or take other steps to back them up. ●● Choose [Disp. Brightness], and then press the [ ][ ] buttons to adjust the brightness.
●● The total card capacity indicated on the formatting screen may be less than the advertised capacity. Low-Level Formatting Your shots are automatically numbered in sequential order (0001 – 9999) and saved in folders that store up to 2,000 images each. You can change how the camera assigns file numbers. ●● Follow steps 2 – 3 in “Formatting Memory Cards” (= 109) to continue with the formatting process.
Before Use Date-Based Image Storage Checking Certification Logos Instead of saving images in folders created each month, you can have the camera create folders each day you shoot to store shots taken that day. Some logos for certification requirements met by the camera can be viewed on the screen. Other certification logos are printed in this guide, on the camera packaging, or on the camera body. ●● Choose [Create Folder], and then choose [Daily].
Before Use Restoring Defaults If you accidentally change a setting, you can restore default camera settings. 1 Basic Guide Advanced Guide Access the [Reset All] screen. 1 2 3 4 5 6 7 8 9 ●● Choose [Reset All], and then press the [ ] button. 2 Restore default settings. ●● Press the [ ][ ] buttons to choose [OK], and then press the [ ] button. ●● Default settings are now restored. ●● The following functions are not restored to default settings.
8 Before Use System Map Basic Guide Included Accessories Accessories Wrist Strap Enjoy the camera in more ways with optional Canon accessories and other compatible accessories sold separately Advanced Guide Battery Pack NB-11LH*1 Battery Charger CB-2LF/CB-2LFE*1 1 2 3 4 5 6 7 8 9 Lens Cap (with Cord) USB Cable (camera end: Mini-B)*2 Memory Card Card Reader Computer Cables Flash AV Cable AVC-DC400 TV/Video System PictBridge-Compatible Printers High-Power Flash HF-DC2 *1 *2 *3 Camera Bas
Use of genuine Canon accessories is recommended. This product is designed to achieve excellent performance when used with genuine Canon accessories. Canon shall not be liable for any damage to this product and/or accidents such as fi re, etc., caused by the malfunction of non-genuine Canon accessories (e.g., a leakage and/or explosion of a battery pack).
Flash Unit Before Use Photo Storage Basic Guide High-Power Flash HF-DC2 ●● External flash for illuminating subjects that are out of range of the built-in flash. Other Accessories Connect Station CS100 Advanced Guide ●● In addition to saving images you shot with your camera and viewing them on a TV, this device allows you to print from Wi-Fi printers and share your images on the Internet. 1 2 3 4 5 6 7 8 9 Interface Cable IFC-400PCU ●● For connecting the camera to a computer or printer.
3 Using Optional Accessories Playback on a TV Turn the TV on and switch to video input. Before Use ●● Switch the TV input to the video input you connected the cable to in step 2. Basic Guide 4 Still Images Movies Connecting the camera to a TV with the AV Cable AVC-DC400 (sold separately) enables you to view your shots on the larger screen of the TV as you control the camera. For details on connection or how to switch inputs, refer to the TV manual.
Using the Software After downloading the software from the Canon website and installing it on your computer, you can do the following things. When you connect the camera to the computer using a retail USB cable (the camera uses Mini-B), you can save your images to the computer.
●● Windows: Follow the steps introduced below. ●● In the screen that is displayed, click the ]. change program link of [ ●● Choose [Downloads Images From Canon Camera] and then click [OK]. ●● Double-click [ 3 ]. ●● Windows 7: If the screen in step 2 is not displayed, click the [ ] icon in the taskbar. ●● Mac OS: If CameraWindow is not displayed after step 2, click the [CameraWindow] icon in the Dock.
4 Printing Images Still Images Movies Your shots can easily be printed by connecting the camera to a printer. On the camera, you can specify images to set up batch printing, prepare orders for photo development services, and prepare orders or print images for photobooks. A Canon SELPHY CP series compact photo printer is used here for the sake of illustration. Screens displayed and available functions vary by printer. Also refer to the printer manual for additional information.
Cropping Images before Printing Configuring Print Settings Still Images 1 Movies Access the printing screen. ●● Follow steps 1 – 6 in “Easy Print” (= 119) to access this screen. 2 Configure the settings. ●● Press the [ ][ ] buttons to choose an item, and then press the [ ][ ] buttons to choose an option. Default Date File No. Both Off Default Off On RedEye 1 No. of Copies Cropping – Paper Settings – Before Use Still Images Matches current printer settings. Prints images with the date added.
Choosing Paper Size and Layout before Printing Still Images 1 Available Layout Options Movies Choose [Paper Settings]. ●● After following step 1 in “Configuring Print Settings” (= 120) to access the printing screen, choose [Paper Settings] and press the [ ] button. 2 Choose a paper size. ●● Press the [ ][ ] buttons to choose an option, and then press the [ ] button. Default Bordered Borderless N-up ID Photo Fixed Size Before Use Matches current printer settings.
3 Movie Printing Options Choose the printing area. ●● Follow step 2 in “Cropping Images before Printing” (= 120) to choose the printing area. Single Sequence 4 Basic Guide Advanced Guide 1 2 3 4 5 6 7 8 9 Print the image. Printing Movie Scenes Still Images 1 Prints the current scene as a still image. Prints a series of scenes, a certain interval apart, on a single sheet of paper. You can also print the folder number, file number, and elapsed time for the frame by setting [Caption] to [On].
Adding Images to the Print List (DPOF) Still Images Movies Batch printing (= 124) and ordering prints from a photo development service can be set up on the camera. Choose up to 998 images on a memory card and configure relevant settings, such as the number of copies, as follows. The printing information you prepare this way will conform to DPOF (Digital Print Order Format) standards.
3 Clearing All Images from the Print List Specify the number of prints. ●● Press the [ ][ ] buttons to specify the number of prints (up to 99). ●● To set up printing for other images and specify the number of prints, repeat steps 2 – 3. ●● Printing quantity cannot be specified for index prints. You can only choose which images to print, by following step 2. ●● When finished, press the [ to return to the menu screen.
2 Adding Images to a Photobook Still Images Movies Photobooks can be set up on the camera by choosing up to 998 images on a memory card and importing them into the software CameraWindow (= 117) on your computer, where they are stored in their own folder. This is convenient when ordering printed photobooks online or printing photobooks with your own printer. Choosing a Selection Method ●● Press the [ ] button, choose [Photobook Set-up] on the [ ] tab, and then choose how you will select images.
9 Appendix Helpful information when using the camera Troubleshooting If you think there is a problem with the camera, first check the following. If the items below do not solve your problem, contact a Canon Customer Support Help Desk. Before Use Basic Guide Advanced Guide 1 2 3 4 5 6 7 8 9 Power Nothing happens when the power button is pressed. ●● ●● ●● ●● Confirm that the battery pack is charged (= 15). Confirm that the battery pack is inserted facing the correct way (= 16).
No AF frames are displayed and the camera does not focus when the shutter button is pressed halfway. Shooting Cannot shoot. ●● In Playback mode (= 61), press the shutter button halfway (= 23). ●● To have AF frames displayed and the camera focus correctly, try composing the shot with higher-contrast subject areas centered before you press the shutter button halfway. Otherwise, try pressing the shutter button halfway repeatedly. Strange display on the screen under low light (= 24).
Recording to the memory card takes too long, or continuous shooting is slower. ●● Use the camera to perform low-level formatting of the memory card (= 110). Shooting settings or FUNC. menu settings are not available. ●● Available setting items vary by shooting mode. Refer to “Functions Available in Each Shooting Mode”, “FUNC. Menu”, and “Shooting Tab” (= 134 – = 137). Shooting Movies ●● Use the camera to format the memory card, or switch to a card that supports high-speed recording.
Cannot resize images for sending. Wi-Fi Cannot access the Wi-Fi menu by pressing the [ ] button. ●● The Wi-Fi menu cannot be accessed while the camera is connected to a printer or computer via a cable. Disconnect the cable. Cannot add a device/destination. ●● A total of 20 items of connection information can be added to the camera. Erase unneeded connection information from the camera first, and then add new devices/destinations (= 103). ●● Use a computer or smartphone to register Web services (= 90).
On-Screen Messages If an error message is displayed, respond as follows. Shooting or Playback Cannot magnify!/Cannot play back this content in Smart Shuffle/Cannot rotate/Cannot modify image/Cannot modify/Cannot assign to category/ Unselectable image ●● The following functions may be unavailable for images that were renamed or already edited on a computer, or images shot with another camera. Note that starred (*) functions are not available for movies.
File Error ●● Correct printing (= 119) may not be possible for photos from other cameras or images that have been altered using computer software, even if the camera is connected to the printer. Print error ●● Check the paper size setting (= 121). If this error message is displayed when the setting is correct, restart the printer and complete the setting on the camera again. Ink absorber full ●● Contact a Canon Customer Support Help Desk to request assistance with ink absorber replacement.
On-Screen Information Shooting (Information Display) (9) (10) (11) (12) (26) (27) (13) (14) (1) (2) (3) (4) (5) (6) (22) AE lock (= 50) (27) IS mode icon (= 32) (23) Shutter speed (28) Time zone (= 107) (24) Aperture value (29) Image stabilization (= 59) Basic Guide (25) Exposure compensation level (= 50) (30) Exposure compensation bar (= 50) Advanced Guide (26) Zoom bar (= 28) Battery Level Display (16) (21) (22) (23) (24) (25) Details Sufficient charge.
Playback (Detailed Information Display) (8) (9)(10) ●● Some information may not be displayed when viewing images on a TV (= 116).
Before Use Functions and Menu Tables Basic Guide Advanced Guide Functions Available in Each Shooting Mode 1 2 3 4 5 6 7 8 9 Shooting Mode Function Exposure Compensation (= 50) Flash (= 58) – O O O O O O O O O O – O O – O O O O O O O O O – – O O O O – – O – O – O – O – O – O – – *1 O O – O – O O – O – O O O O O O O O O O O O O O – O O O O O O O O O O O O O – O O – O O O – O – – – O – O O O – O – O O O – O – O –
Before Use FUNC.
Shooting Mode Before Use Basic Guide Function Still Image Aspect Ratio (= 37) – O O – – O – – O O O O O O O O O O O O O O – O – O – O – O – O O – O – O – – – – – – O – O – O O O – O O – O O O O O O O O O O – O – O – O – O – O – Resolution (= 37) Compression (= 59) – O – – O O O O O – O – – – – – – – – – – – – O O O O O O O O O O O O O O O O O O O O O *1 O O O O O O Advanced Guide 1 2 3 4 5 6
Before Use Shooting Tab Basic Guide Shooting Mode Advanced Guide Function AF Frame (= 55) Face AiAF O – O O – – O O O – O O – O O O O O O O O O – O O O – O O O O O – O O O O – O O – – – – O O O O – O O O O O O – – – – – – – O O O – O O O O O – O – O – O – O – O – O – O – O – O – O – O O O O O O – – – O O O – O O O O O O O O O O O O O O O – – O O O – – O O O O O O O Off Servo AF (= 5
Shooting Mode Basic Guide Function AF-assist Beam (= 39) On O O O O O O O O O O O O – O O O O O O O O O O O O O O O O O O O O O O O O O O O – O O – O – – – – – – – – – – O O O O – – O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O – O O O O O O O O O O O O O Shoot Only O O O O O O O O O O O O 1 O O O O O O O
Set Up Tab Before Use Playback Tab Options Reference Page Options Reference Page Mute = 106 Slideshow = 66 Volume = 106 Erase = 70 Hints & Tips = 107 Protect = 67 Date/Time = 17 Rotate = 71 Time Zone = 107 Favorites = 72 Lens Retraction = 108 Photobook Set-up = 125 Eco Mode = 108 i-Contrast = 75 Power Saving = 23, = 108 Red-Eye Correction = 76 Disp.
Print Tab Handling Precautions Options Printing Reference Page – ●● The camera is a high-precision electronic device. Avoid dropping it or subjecting it to strong impact. Select Images & Qty. = 123 Select Range = 124 Select All Images = 124 ●● Never bring the camera near magnets, motors, or other devices that generate strong electromagnetic fields. The electromagnetic fields may cause malfunction in the camera or erase image data.
Built-In Flash Flash Range (Wide angle end)..........50 cm – 5.0 m (1.6 – 16 ft.) Flash Range (Telephoto end)............1.4 m – 2.7 m (4.6 – 8.9 ft.) Specifications Shutter Speed Auto Mode (automatic settings).........1 – 1/4000 sec. Range in all shooting modes Maximum.......................................15 sec. Minimum........................................1/4000 sec. Camera Image Sensor Camera Effective Pixels (Max.) (Image processing may cause a decrease in the number of pixels.) .................
Interface Wired................................................. Hi-Speed USB (Mini-B) Analog Audio Output (Monaural) Analog Video Output (NTSC/PAL) Wireless............................................. Wi-Fi Specifications: IEEE 802.11b/g/n Frequency: 2.4 GHz Channels: 1 – 11 Security: WEP, WPA-PSK (AES/ TKIP), WPA2-PSK (AES/TKIP) NFC Operating Environment Temperature......................................0 – 40 °C (32 – 104 °F) Dimensions (CIPA compliant) (WxHxD)............................................
Number of Shots per Memory Card Recording Time per Memory Card The number of shots at an aspect ratio (= 37) of 4:3 per memory card is as follows. Note that the number of shots available varies by aspect ratio. Number of Shots per 16 GB Memory Card (Approx. shots) 1792 Recording Pixels Total Recording Time per 16 GB Memory Card (Approx.) Before Use Recording Time for One Time (Approx.) (1280 x 720) 2 hr 35 min. 37 sec. 29 min. 59 sec. (640 x 480) 8 hr 25 min. 48 sec.
Battery Pack NB-11LH Type: Rechargeable lithium-ion battery Nominal Voltage: 3.6 V DC Nominal Capacity: 800 mAh Charging Cycles: Approx. 300 times Operating Temperatures: 0 – 40 °C (32 – 104 °F) Before Use Basic Guide Advanced Guide 1 2 3 4 5 6 7 8 9 Battery Charger CB-2LF/CB-2LFE Rated Input: 100 – 240 V AC (50/60 Hz) Rated Output: 4.2 V DC, 0.41 A Charging Time: Approx. 2 hr. 20 min.
Index A Accessories 114 AE lock 50 AF frames 55 Aspect ratio 37 AUTO mode (shooting mode) 19, 28 AV cable 115, 116 B Batteries → Date/time (date/time battery) Power saving 23 Battery charger 2, 114 Battery pack Charging 15 Eco mode 108 Level 132 Power saving 23 Black and white images 53 C Camera Reset all 112 Camera access point mode 84 Camera connect 79 CameraWindow 117 CANON iMAGE GATEWAY 78, 90 Center (AF frame mode) 55 Clock 27 Color (white balance) 52 Compression ratio (image quality) 59 Connectin
Protecting 67 R Red-eye correction 76 Remote shooting 102 Reset all 112 Resizing images 73 Resolution (image size) 37 Rotating 71 S Saving images to a computer 85, 117 Screen Display language 18 Icons 132, 133 Menu → FUNC.
Wi-Fi (Wireless LAN) Precautions ●● Countries and Regions Permitting WLAN Use -- Use of WLAN is restricted in some countries and regions, and illegal use may be punishable under national or local regulations. To avoid violating WLAN regulations, visit the Canon website to check where use is allowed. Note that Canon cannot be held liable for any problems arising from use in other countries and regions.
If security settings have not been properly set, the following problems may occur. ●● Transmission monitoring Third parties with malicious intent may monitor Wi-Fi transmissions and attempt to acquire the data you are sending. ●● Unauthorized network access Third parties with malicious intent may gain unauthorized access to the network you are using to steal, modify, or destroy information.
Disclaimer ●● Unauthorized reproduction of this guide is prohibited. ●● All measurements based on Canon testing standards. ●● Information subject to change without notice, as are product specifications and appearance. Before Use Basic Guide Advanced Guide 1 2 3 4 5 6 7 8 9 ●● Illustrations and screenshots in this guide may differ slightly from the actual equipment. ●● The above items notwithstanding, Canon cannot be held liable for any loss arising from the use of this product.
