User Manual
89
Before Use
Basic Guide
Advanced Guide
Wi-Fi Functions
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
P Mode
Playback Mode
Setting Menu
Accessories
Appendix
Index
4
Send an image.
● Press the [ ][ ][ ][ ] buttons to choose
[Select and send], and then press the [ ]
button.
● Press the [
][ ] buttons to choose
[Select], and then press the [ ] button.
● Press the [
][ ][ ][ ] buttons to choose
an image to send, press the [ ] button to
mark it as selected ([ ]), and then press
the [ ] button.
● Press the [
][ ] buttons to choose [OK],
and then press the [ ] button.
● Press the [
][ ][ ][ ] buttons to choose
[Send], and then press the [ ] button.
● [Transfer completed] is displayed after
the image is sent, and the image transfer
screen is displayed again.
● To end the connection, press the
[
] button, press the [ ][ ] buttons
on the conrmation screen to choose
[OK], and then press the [ ] button. You
can also use the smartphone to end the
connection.
2
Establish the connection.
● Make sure the camera is off or in
Shooting mode.
● Touch the N-Mark (
) on the smartphone
with Camera Connect installed against
the camera’s N-Mark.
● The camera screen automatically
changes.
● If the [Device Nickname] screen is
displayed, press the [
][ ] buttons to
choose [OK], and then press the [ ]
button.
● Camera Connect is started on the
smartphone.
● The devices are connected automatically.
3
Adjust the privacy setting.
● After this screen is displayed, press the
[ ][ ] buttons to choose [Yes], and then
press the [ ] button.
● You can now use the smartphone to
browse, import, or geotag images on the
camera or shoot remotely.