User Guide

240
ç Contents ç
Chapter Contents
Shots are out of focus.
• Press the shutter button halfway to focus on subjects before pressing it all
the way down to shoot (=
36).
• Make sure subjects are within focusing range (=
272).
• Set [Lamp Setting] to [On] (=
66).
• Conrm that unneeded functions such as macro are deactivated.
• Try shooting with focus lock (=
93).
No AF frames are displayed and the camera does not focus
when the shutter button is pressed halfway.
• To have AF frames displayed and the camera focus correctly, try
composing the shot with higher-contrast subject areas centered before you
press the shutter button halfway. Otherwise, try pressing the shutter button
halfway repeatedly.
Subjects in shots look too dark.
• Set the ash mode to [ ] (= 97).
• Adjust brightness by using exposure compensation (=
83).
• Adjust contrast by using i-Contrast (=
86, 130).
• Use spot metering (=
84).
Subjects look too bright, highlights are washed-out.
• Set the ash mode to [ ] (= 61).
• Adjust brightness by using exposure compensation (=
83).
• Use spot metering (=
84).
• Reduce the lighting on subjects.
Shotslooktoodarkdespitetheashring(= 49).
• Shoot within ash range (= 268).
• Increase the ISO speed (=
85).
Subjectsinashshotslooktoobright,highlightsare
washed-out.
• Shoot within ash range (= 268).
• Set the ash mode to [
] (= 61).