User Guide
53
BeforeUse
BasicGuide
AdvancedGuide
CameraBasics
AutoMode
OtherShooting
Modes
PMode
PlaybackMode
SettingMenu
Accessories
Appendix
Index
Still Images
Changing the Image Display Style after Shots
You can change how long images are displayed and what information is
displayed immediately after shooting.
ChangingtheImageDisplayPeriodafterShots
1 Accessthe[Reviewimageafter
shooting]screen.
Press the [ ] button, choose
[Review image after shooting] on the
[
] tab, and then press the [ ] button
(=
22).
2 Congurethesetting.
Choose [Display Time], and then choose
the desired option (=
22).
Quick Displays images only until you can shoot again.
2 sec., 4 sec.,
8 sec.
Displaysimagesforthespeciedtime.Evenwhiletheshotisdisplayed,
you can take another shot by pressing the shutter button halfway again.
Hold Displays images until you press the shutter button halfway.
Off No image display after shots.
ChangingtheScreenDisplayedafterShots
Change the way images are displayed after shots as follows.
1 Set[DisplayTime]to[2sec.],
[4sec.],[8sec.],or[Hold]
(=
5 3 ).
2 Congurethesetting.
Choose [Display Info], and then choose
the desired option (=
22).
Off Displays only the image.
Detailed
Displays shooting details (=
98).
• When [Display Time] (=
53) is set to [Off] or [Quick], [Display Info] is set to
[Off] and cannot be changed.
• By pressing the [
] button while an image is displayed after shooting, you
can switch the display information. Note that the settings of [Display Info] are
not changed. You can also erase images by pressing the [
] button, or protect
images (=
59) by pressing the [ ] button.