User Manual

3 Setting the FlashN
200
 Flash mode
When using an external Speedlite, you can select the flash mode to
suit your desired flash shooting.
 [E-TTL II] is the standard mode of
EX-series Speedlites for automatic
flash shooting.
 [Manual flash] enables you to set the
flash output yourself. This is for
advanced users.
 Regarding other flash modes, refer to
the instruction manual of a Speedlite
compatible with the functions.
 Shutter synchronization
Normally, set this to [1st curtain] so that the flash fires immediately
after the exposure starts.
If [2nd curtain] is set, the flash will fire right before the shutter
closes. When this is combined with a slow shutter speed, you can
create a trail of light such as from car headlights at night with a more
natural feel. With E-TTL II (auto flash exposure), the flash will be
fired twice in a row: once when you press the shutter button
completely and once right before the end of the exposure. Also, if
the shutter speed is 1/30 sec. or faster, first-curtain synchronization
will be applied automatically.
If an external Speedlite is attached, you can also select [High-speed
synchronization] (e). For details, refer to the Speedlite’s
instruction manual.
 Flash exposure compensation
See “Flash Exposure Compensation” on page 117.
 E-TTL II flash metering
For normal flash exposures, set it to [Evaluative]. [Average] is for
advanced users. As with an external Speedlite, the metering is
averaged for the entire area. Depending on the scene, flash
exposure compensation may be necessary.