Owner's Manual
Table Of Contents
- Instruction Manual
- Table of Contents
- Parts & Controls
- Introduction
- Basic Network Settings
- Transferring Images to an FTP Server
- Operating Remotely Using EOS Utility
- Operating Remotely Using WFT Server
- Operating Remotely Using a Smartphone
- Linked Shooting
- Synchronizing the Camera Time Wirelessly
- Terminating the Connection and Reconnecting
- Checking and Operating Connection Settings
- Troubleshooting Guide
- Reference
- Specs
- Index
- Scan of CD-ROM
- Warranty
25
The instructions in this chapter are continued from page 24.
The camera and each device can be directly connected wirelessly. No
access point is necessary, so you can establish a wireless connection
easily.
To establish connection, operations on the computer, smartphone, etc. are
required. For details, refer to the corresponding device’s instruction manual.
1
Select [Easy connection].
Select [OK] and press <0> to go to
the next screen.
2
Operate the target device and
connect it to the camera.
Activate the Wi-Fi function of the
target device, then select the SSID
(network name) displayed on the
camera’s LCD monitor.
For the password, enter the
encryption key (password) displayed
on the camera’s LCD monitor.
Connecting with Easy Connection
Encryption key (password)
SSID (network name)
Smartphone’s screen (sample)Computer’s screen (sample)
When connecting by selecting [Easy connection], “_Canon0A” is
displayed at the end of the SSID.