Owner's Manual
Table Of Contents
- Instruction Manual
- Table of Contents
- Parts & Controls
- Introduction
- Basic Network Settings
- Transferring Images to an FTP Server
- Operating Remotely Using EOS Utility
- Operating Remotely Using WFT Server
- Operating Remotely Using a Smartphone
- Linked Shooting
- Synchronizing the Camera Time Wirelessly
- Terminating the Connection and Reconnecting
- Checking and Operating Connection Settings
- Troubleshooting Guide
- Reference
- Specs
- Index
- Scan of CD-ROM
- Warranty
39
Configuring FTP Server Connection Settings
4
Set the port number.
[Port number setting] should usually
be 00021.
Select [OK] and press <0> to go to
the next screen.
5
Set the passive mode setting.
Select [OK] and press <0> to go to
the next screen.
If an Error 41 (“Cannot connect to
FTP server”) is displayed in step 8,
setting [Passive mode] to [Enable]
may resolve it.
6
Set the proxy server.
Select [OK] and press <0> to go to
the next screen.
7
Set the login method.
Select [OK] and press <0> to go to
the next screen.