Owner's Manual
Table Of Contents
- Instruction Manual
- Table of Contents
- Parts & Controls
- Introduction
- Basic Network Settings
- Transferring Images to an FTP Server
- Operating Remotely Using EOS Utility
- Operating Remotely Using WFT Server
- Operating Remotely Using a Smartphone
- Linked Shooting
- Synchronizing the Camera Time Wirelessly
- Terminating the Connection and Reconnecting
- Checking and Operating Connection Settings
- Troubleshooting Guide
- Reference
- Specs
- Index
- Scan of CD-ROM
- Warranty
48
After shooting, you can select multiple images as desired and transfer
them all at once. You can also transfer unsent images or images that
could not be sent previously. Additionally, you can add a caption before
transferring images.
You can also continue still photo shooting even while images are being
transferred.
When the Live View shooting/Movie shooting switch is set to
<k>, images cannot be transferred. Set it to <A>.
Sel.Image
1
Select [Image transfer].
Under the [32] tab, select [Image
transfer], then press <0>.
2
Select [Image sel./transfer].
3
Select [Sel.Image].
Batch Transfer
Selecting the Images to be Transferred