Owner's Manual

When using stroboscopic flash with a slow shutter speed, you can shoot

multiple successive movements within a single picture, similar to stop-

motion pictures.

With stroboscopic flash, set the flash output, number of flashes, and

flash frequency (number of flashes per second = Hz). For the maximum

number of continuous flashes, see page 44.

Set the flash mode to <?>.

Press the <E> button.

Turn <9> to select <Q>, then

press <8>.

Select an item.

Press the <@> function button

for the flash output, press <Q>

for the number of flashes, and press

<G> for the flash frequency.

X You can set the item of the button you

pressed.

Set the value.

Turn <9> to set the value, then

press <8>.

Repeat steps 2 and 3 to set the flash

output, number of flashes, and flash

frequency.

?: Stroboscopic FlashN

Number of flashes

Flash frequency

Flash output