Guide for Windows

CONTENTS

GLOSSARY

INDEX

Chapter 4

Scanning Devices

Scanning with the Automatic Document Feeder

To scan using the Automatic Document Feeder:

1. Make sure the automatic document feeder is set up. Use the previous

procedure to ensure that the ADF is installed correctly.

2. Insert the paper to be scanned in the document tray, printed side up, and

upper edge first. Align the paper according to the paper alignment marks

on the document tray.

3. Start the application from which you want to scan.

4. Select the source device.

5. Select the Acquire command in the acquiring application.

6. If the ScanGear CS-S window opens, click the device tab for the scanner

you are using.

7. On the Image Source list, select Document Feeder.

8. Change any other settings on the ScanGear CS-S window. For example, if

the acquiring application is an OCR application, make sure the OCR 300

dpi setting has been selected as the Scan Resolution on the Main tab.