Guide for Windows

CONTENTS

GLOSSARY

INDEX

Chapter 4

Scanning Devices

9. Do one of the following:

• Click Preview to preview a page before scanning the remainder. You

will have to re-load this page in the feeder to scan it.

• Click Scan to scan all the pages in the feeder tray with no further

intervention. In a graphics imaging application, each page is acquired

as a separate file. In some OCR applications, each page is acquired as a

separate file, while in other OCR applications, each page is appended

into one file.

Tips for Using the Automatic Document Feeder

Here are some tips for using the Automatic Document Feeder

• Make sure Document Feeder is selected in the Image Source setting on

the scanner’s settings tab.

• If there is a paper jam message, make sure the paper in the document

tray is not stuck together. Open the ADF cover (do not lift up the entire

ADF unit), remove the paper, close the lid, and reload the paper. Only a

few documents should be loaded in the document tray at a time.

• Make sure no other document has been left on the document glass

under the Document Feeder.

• If you see a message on the screen that says something like this:

“Device failed/cannot find TWAIN...” make sure you have turned on

your scanner first, before your PC. If necessary, turn the scanner off and

back on again.

• If the Document Feeder tries to feed but cannot, and you hear a

bumping noise in the scanner, check that the scanner’s scanning head

is not locked. If you have just unpacked your scanner, this lock may be

in place to protect the scanning head. See your scanner documentation

for details.

• Documents are scanned from top to bottom order.

• Select the proper Paper Size from the device tab.