Owner's Manual

Using the Built-in Flash
In indoors, low light, or backlit conditions, just pop-up the built-in flash and press
the shutter button
to take flash pictures. In the <P > mode, the shutter speed
(1/60
sec. - 1/200 sec.) will be set automatically to prevent camera shake.
Effective Flash Range
1 Press the < ~ > button.
~ In Creative Zone modes, you can
press the
< ~ > button anytime to take
flash pictures.
~ While the flash is recycling, "~buSY"
is displayed in the viewfinder, and
[BUSY ~] is displayed on the upper
left of the LCD monitor.
Press the shutter button halfway.
~ In the bottom left of the viewfinder,
check that the
< ~ > icon is lit.
Take the picture.
G When focus is achieved and you
press the
shutter button completely,
the flash will fire for the picture.
[Approx. in meters / feet]
100 1-3.7/3.3-12.1 1- 2.3/3.3 - 7.5 1- 3.3/3.3 - 10.8
1- 2.3/3.3 - 7.5
200 1- 5.3/3.3 - 17.4 1- 3.3/ 3.3 - 10.8
1- 4.6/ 3.3 - 15.1 1- 3.3/3.3 - 10.8
400 1- 7.4/3.3 - 24.3 1- 4.6/ 3.3 - 15.1 1- 6.5/3.3 - 21.3
1- 4.6/ 3.3 - 15.1
800 1- 10.5/3.3 - 34.4
1- 6.6/3.3 - 21.7 1- 9.2/3.3 - 30.2
1- 6.6/3.3 - 21.7
1600
1- 14.9/3.3 - 48.9 1- 9.3/3.3 - 30.5 1- 13.0/3.3 - 42.7
1- 9.3/ 3.3 - 30.5
54