Owner's Manual

Handy Features
Under the [fT 1] tab, select [Auto rotate],
then press
< 8 >. See the descriptions of
the settings below and select the desired
setting. Then press
<8 >.
~ [On 01 .]: The vertical image is automatically rotated on both
the camera's LCD monitor and on the personal computer.
~ [On.]: The vertical image is automatically ~otated only on the
personal computer.
~ [Off]: The vertical image is not automatically rotated at all.
~ The vertical image is not rotated during the image review
immediately after it is captured.
The vertical image is rotated only for playback.
~ [On 01 .] is set, but the image does not rotate during playback.
Auto rotate will not work with vertical images captured while [Auto rotate] was
set to [Off]. Also, if the vertical image
is taken while the camera is pointed up
or down, the image might not rotate for playback.
In such a case, see
"Rotating the Image"
on page 119.
~ Rotating an image on the camera's LCD monitor when [On.]
had been set.
Set [OnO.], then playback the image. It will be rotated.
~ The vertical image does not rotate on the personal computer screen.
The software used is not compatible with image rotation. Use the camera's
bundled software instead.
98