Owner's Manual

Transferring Images to a Personal Computer _
By connecting the camera to a personal computer, you can transfer
images from the camera's CF card by operating the camera. This
is
called direct image transfer.
o Before connecting the camera to the personal computer, be
sure to install the bundled software (EOS Digital Solution Diskl
CD-ROM) in the personal computer.
For instructions on how to install the software, see "Software Guide."
Preparation for •. Image .... ransfer
1 Connect the camera to the
personal computer.
• Turn off the camera's power switch
before connecting it.
{i Use the USB cable provided with the
camera to connect it to the personal
computer.
Set the camera's power switch to
<ON>.
• When the program selection screen appears
on the personal computer, select [EOS
Utility]. When the camera model selection
screen appears, select your camera's model.
~ The [EOS Utility] screen will appear
on the computer, and the [Direct
Transfer] screen will appear on the
camera's LCD monitor.
o ® While the direct transfer screen is displayed, pressing the shutter button
halfway will not return the camera to shooting-ready.
~ Before disconnecting the cable, turn off the camera first and pull out the
cable by grasping the plug (instead
of the cord).
[J] If the [EOS Utility] screen does not appear on the computer, see "Connect
the Camera
andthe Computer and then Start EOSUtility" in the Software
Instruction Manual
inthe CD-ROM.
107