Owner's Manual

About "Sensor cleaning: Manual" * •
Under the [fT2] tab, [Sensor cleaning: Manual] is mainly for use by
Canon service personnel. Dust which could not be eliminated by the
Self Cleaning Sensor Unit can
be directly cleaned off the sensor.
Therefore, you normally need not use this feature.
The
surface of the imaging sensor is extremely delicate. If the
sensor needs to be cleaned directly, have it done by a Canon
Service Center.
However, if you want to clean the sensor yourself, follow the procedure
below:
Select [Sensor cleaning: Manual].
~ Under the [fT2] tab, select [Sensor
cleaning: Manual], then press <8>.
Select [OK].
* Select [OK], then press <8 >.
~ In a moment, the mirror will lockup
and the shutter will open to expose
the sensor.
You can now clean the
sensor.
Exit the cleaning.
~ Set the power switch to <OFF>.
114