Owner's Manual

Table Of Contents
t(
Printing with PictBridge
Start printing.
Select [Print], then press <@>.
The <
~stV
> button's blue lamp will
blink and the printing will start.
When the printing ends, the screen
will return to step
1.
To
stop the printing, press
<@>
while
[Stop] is displayed, then select
[OK]
and press <@>.
Handling Printer Errors
If you resolve a printer error (no ink, no paper, etc.) and select [Continue] to
resume printing but it does not resume, operate the buttons
on
the printer to
resume printing. For details, see the printer's instruction manual.
Error Messages
If a problem occurs during printing,
an
error message will appear on the
camera's LCD monitor. Press
<@>
to stop printing. After resolving the
problem, resume printing. For details on how to resolve a printing problem,
refer to the printer's instruction manual.
Paper Error
Check whether the paper
is
properly loaded
in
the printer.
Ink Error
Check the printer's ink level, and check the waste ink tank.
Hardware Error
Check for any printer problems other than paper and ink problems.
File Error
The selected image cannot be printed via PictBridge. Images taken with a
different camera or images edited with a computer might not be printable.
[l]
~
Depending onJhe image's file size and recording quality, it may
take
some
timeforthe
printing to start after you select [Print].
@ The.[Default] setting
for
printingeffects.and.other options are the
printer's own default settings as set by the printer's manufacturer. See
the printer's.instructionmanual to find out what the [Default] settings are.
138