Owner's Manual

Error code
Countermeasures
Troubleshooting Guide
ThelmCiggcCinnotbe.erased.
@ If the image has been erase-protected, it cannot be erased. (p.122)
Thewrong·st'lootingdateandiimeis.displayed.
@ The correct date and time has not been set. (p.37)
No ·iI11age-appears •• ontheTV.·screen •.
@ Make sure the video cable plug is connected all the way in. (p.121)
~ Set the video OUT format (NTSC/PAL) to the same video format as
the
TV. (p.157)
f$ Use the video cable that came with the camera. (p.121)
Error Codes Iii.' •••••••••• I.@.0.1 ••• _.···B« ... h •• ···.··
If a problem occurs with the camera, an
error message is displayed. Follow the
suggested solution to resolve the
problem.
To recover from the error
screen, turn the power switch off and
on,
or remove and reinstall the battery.
If error 02 (CF card problem) is displayed,
remove and reinstall the CF card or
format the card. This may resolve the
problem.
If the same error keeps occurring, there may be a problem. Write
down the error code and consult your nearest Canon Service
Center.
-- Ifan error code appears right after shooting, the picture might not have been
captured. After the error is resolved, press the
< [B > button and check if the
picture was captured.
163
•