Owner's Manual

Using the Built-in Flash
In indoors, low light, or backlit conditions, just pop-up the built-in flash and press
the shutter button
to take flash pictures. In the <P > mode, the shutter speed
(1/60 sec. - 1/200 sec.) will be set automatically to prevent camera shake.
Effective Flash Range
1 Press the < ~ > button.
@) In Creative Zone modes, you can
press the <
~ > button anytime to take
flash pictures.
• While the flash is recycling,
"~buSY"
is displayed in the viewfinder, and
[BUSY
~] is displayed on the upper
left
of the LCD monitor.
Press the shutter button halfway.
• In the bottom left of the viewfinder,
check that the
< ~ > icon is lit.
Take the picture.
@) When focus is achieved and you
press the shutter button completely,
the flash will fire for the picture.
[Approx. in meters / feet]
100
1- 3.7 /3.3 - 12.1 1- 2.3/3.3 - 7.5
1- 3.3 / 3.3 - 10.8
1- 2.3 / 3.3 - 7.5
200
1-5.3/3.3-17.4 1- 3.3 / 3.3 - 10.8
1- 4.6 / 3.3 - 15.1
1- 3.3 / 3.3 - 10.8
400
1- 7.4 / 3.3 - 24.3 1- 4.6 / 3.3 - 15.1
1- 6.5 /3.3 - 21.3
1- 4.6 / 3.3 - 15.1
800 1- 10.5/3.3 - 34.4
1- 6.6 / 3.3 - 21.7 1- 9.2 / 3.3 - 30.2
1- 6.6 / 3.3 - 21.7
1600
1- 14.9/3.3 - 48.9 1- 9.3 / 3.3 - 30.5 1-13.0/3.3 - 42.7
1- 9.3/3.3 - 30.5
54