Owner's Manual

* FE Lock*
FE lock locks the flash exposure setting over the desired area of the
subject. This feature also works with external EX-series Speedlites.
* FE stands for Flash Exposure.
1 Press the < ~ > button to pop-up
the built-in flash.
fJ Press the shutter button halfway and
look
in the viewfinder to check that
the
<~> icon is lit.
Focus the subject.
Press the
<*> button. (816)
e Aim the viewfinder center over the subject
where you want to lock the flash
exposure, then press the <*> button.
~ The flash will fire a preflash and the
required flash output
is calculated
and retained
in memory.
~ In the viewfinder, "FEL" is displayed
for a moment and
< ~ *> will light.
fJ Each time you press the <*> button, a
preflash is fired and the required flash output
is calculated and retained in memory.
Take the picture.
e Frame the shot and press the shutter
button completely.
~ The flash is fired to take the picture.
85