Owners manual

156
Chapter 7 ScanFront Administration Tool for SF400
3. ScanFront Administration Tool for SF400 Setup
❏ Starting ScanFront Administration Tool
for SF400
Click the [Start] button, [All Programs], [ScanFront
Administration Tool for SF400], and then [ScanFront
Administration Tool for SF400]. ScanFront
Administration Tool for SF400 starts.
Quitting ScanFront Administration Tool for
SF400
Click [Close] in the [File] menu.
❏ Registering ScanFront Scanners
To manage a ScanFront scanner using ScanFront
Administration Tool for SF400, add the ScanFront to the
ScanFront Administration Tool for SF400 list as follows.
1. Click [Add] in the [Edit] menu.
The [Create new items] window appears.
2. Enter information for the ScanFront you want to
register.
• Enter the IP address of the ScanFront in [IP address/
Device name].
• If an administrator password is configured for the
ScanFront, enter it in [Administrator Password].
• If a device password is configured for the ScanFront,
enter it in [Device password].
• After you enter an IP address for a ScanFront, another
information entry row will be added below. This allows
you to enter information for multiple ScanFront
scanners.
3. Click [OK].
The registered ScanFront scanners are added to the
ScanFront Administration Tool for SF400 list.