Owners manual

159
Chapter 7 ScanFront Administration Tool for SF400
After you enter the new administrator password and device
password and click [OK], the [Password] dialog box will
close, and the administrator password and device
password registered to ScanFront Administration Tool for
SF400 will be changed.
Hint
If multiple ScanFront scanners are selected, a dialog box for
changing the password of the first selected ScanFront in the list
appears. A dialog box for changing the password of the next
ScanFront appears when you click [OK]. To configure the same
password for all the ScanFront scanners, select the [Do this for
the all password input] check box before clicking [OK].
❏ Changing IP Addresses and Device
Names
Double-click a ScanFront scanner in the list to display the
[IP Address / Device Name] dialog box, and then change
the IP address or device name of the selected ScanFront.
After you enter the IP address or device name and click
[OK], the dialog box will close, and the specified IP
address or device name will be applied.
❏ Checking Detailed Information on the
ScanFront
Click the [Check Details] button that appears for the
ScanFront scanners registered in the list to display the
[Details] window.
IMPORTANT
You can only perform this operation for ScanFront scanners to
which ScanFront Administration Tool for SF400 is able to
connect.
A list of users registered to the ScanFront appears in the
[Details] window.
You can use the following buttons in the window to
manage the users registered to the ScanFront.