Manualshelf

Owners manual

ManualsBrandsCanon ManualsComputers & LaptopsScanFront 400 Sheetfed Scanner - 600 dpi Optical - 24-bit Color - 8-bit Grayscale - 45 ppm (Mono) - 45 ppm (Color) - Duple
21222324252627282930
30
Chapter 2 ScanFront Setup
❏ Turning the Power OFF
Press the [Power off] button displayed at the bottom left of
the panel to turn the scanner OFF.
IMPORTANT
• When restarting the scanner, wait at least 5 seconds after
turning the power OFF before turning it ON again.
• If the scanner stops responding, press and hold the power
button to shut down the system, and then press the power
button to turn the scanner ON again. In such cases, settings
configured immediately before shutting down may be lost.
• After ScanFront transitions to Low Power Mode while not
connected to a network, power will automatically turn OFF
when the scanner is not operated for approximately 4 hours.