Owners manual

79
Chapter 4 Operating Procedures
FTP Registration Screen
• Protocol
Select the protocol to be used when sending by FTP.
When performing encrypted communication, you can
select [FTP], [FTPS (Explicit)], [FTPS (Implicit)] or
[SFTP]. When [SFTP] is selected, you can select
[Authentication Method].
•Name
Enter the name to appear in the address book.
•FTP server
Enter the address of the FTP server.
• Folder path
Enter the path of the sub-folder when specifying a sub-
folder on the FTP server.
Hint
If the path of the sub-folder is unknown, use the procedure
below to specify the sub-folder.
1. Enter the server address, user name, and password, and
click [Browse] to log in to the FTP server.
2. Specify any sub-folder at the level of the displayed folder and
click [OK].
• Authentication Method
When [SFTP] is selected in [Protocol], select the
Authentication Method from [Password Authentication]
or [Private Key Authentication].
• Port number
Enter the port number. The standard port number is 21.
• User name/Password
Enter the user name and password for logging in to the
FTP server.
IMPORTANT
Enter the user name and password of an account with write
permission for the FTP server.
• Save password
Save the entered password.