Brochure

Configuration/Platen: Digital, Multifunction Imaging System
I
maging System: Electrophotographic Process
Developing System: SPD, Two Component Dry
A
cceptable Originals: Sheets, Transparencies, Tabs, Covers
Max. Originals Size: 14.33" x 18.5"*
M
in. Originals Size: 7" x 8.27"*
Max. Print Size: 14" x 18.25"
E
ngine Resolution: 600 x 600 dpi
P
aper-feeding: 3-drawer Modular
P
aper Capacity
S
tandard: 4,000 Sheets
Drawer 1 (Top): 1,000 Sheets (20 lb.)
D
rawer 2: 1,000 Sheets (20 lb.)
Drawer 3: 2,000 Sheets (20 lb.)
M
aximum: 12,000 Sheets
▲
Acceptable Paper Weight: 16 lb. Bond to 150 lb. Index (All Cassettes)
l
D
u
plexing: Trayless Duplexing (Except Tabs)
W
arm-up Time: 6 Minutes
M
aximum Print Speed: 125 ppm (LTR/LGL), 62.5 ppm (LDG)
D
imensions (H x W x D): 64" x 119.5" x 47"
(
163c
m
x
3
04c
m
x 119cm)
W
eight:
2
,695 l
b
. (1,222k
g
)
Power Requirements
(
V/Hz/Amp
s
):
208/60/30
N
oise Level (Printing): <70dB
D
uty Cycle: 2.5 to 4.25 Million Impressions per Month**
Developer: 1.69kg—Estimated Yield:
1,200,000 Prints
(L
T
R)
T
o
ner:
2
.5k
g—E
stimated Yield:
80,000 Prints
(
L
TR, 6% C
o
v
erage)
Accessories
Finisher
Number of Trays: 2 Trays
Tray Capacity
T
op Tray: 500 Sheets (All Sizes) Non-staple Mode
St
aple Tray: 3,000 Sheets (Straight or Offset/
85
Sets with Staple)
P
aper Size
Top Tray: 7" x 8.27" to 14.33" x 18.5"*
Staple Tray: 7" x 8.27" to 9" x 14"*
St
ap
l
e Position: Multiposition Stapling
Stit
ching Capacity: None, Top, Bottom, Both
Document Delivery: Face-down
St
aples: 50,000
Power Supply: Directly from Main Unit
W
eight: 650 lb. (294.7kg)
Dimensions (H x W x D): 61.5" x 22.5" x 34"
(156cm x 58cm x 86cm)
DR-7080C (Optional)
O
ptical Resolution: 600 x 600 dpi
S
peed (Simplex/Duplex LTR): 70 ppm/36 ipm
P
aper Feeder Capacity: 100 Sheets (LTR, 20 lb.)
Document Size: ADF (Width) 5.5"–12"
ADF (Length) 5"–17"
Paper Weight Range: 13 lb.–32 lb. Bond (50-128 g/m2)
W
eight: 74 lb.
D
imensions (H x W x D): 11.8" x 22.6" x 23.7"
Paper Supply Module (Optional)
Number of Trays: 3 Cassettes
T
ray Capacity
D
rawer 4, 7 (Top): 1,000 Sheets (20 lb.)
D
rawer 5, 8: 1,000 Sheets (20 lb.)
D
rawer 6, 9: 2,000 Sheets (20 lb.)
P
aper Size: 16 lb. Bond to 150 lb. Index
l
W
eight: 545 lb. (247.4kg)
Dimensions (H x W x D): 45" x 35.5" x 31.5"
(114c
m x 90cm x 85cm)
P
o
s
t
-process Inserter (Optional)
N
umber of Trays: 3 Cassettes
T
ray Capacity
D
rawer 1 (Top): 1,000 Sheets (7" x 8.27" to 9" x 14")*
D
rawer 2: 1,000 Sheets (7" x 8.27" to 14.33" x 18.5")*
D
r
a
wer 3: 2,000 Sheets (7" x 8.27" to 14.33" x 18.5")*
P
a
per
W
eight:
1
6 l
b
. Bond t
o 150 l
b
. Index
l
Weight: 610 lb. (276.7kg)
Dimensions (H x W x D): 49.5" x 31" x 33.5"
(
125.7cm x 78.7cm x 85.1cm)
P
uncher (Optional)
P
ower Requirements: 120 VAC, 60Hz, 2.5A
1
00
VAC, 50/60Hz, 2.5A
P
o
wer Consumption: 320 VA
D
imen
s
ion
s
(
H x W x D): 49.6" x 40.2" x 31.9"
(
126cm x 102cm x 81cm)
W
eight:
595 l
b
. (270k
g)
Punch Tools
• Loose-leaf/Office Hole-punch Tool (2-/3-/4-hole)
• Pl
a
stic Comb Punch Tool (Rectangular)
• Wire Comb Punch Tool 2-1 Pitch (Round)
•
Wire Comb Punch Tool 3-1 Pitch (Round)
•
Wire Comb Punch Tool 2-1 Pitch (Rectangular)
• Wire Comb Punch Tool 3-1 Pitch (Square)
Punch Tool Durability: 12 - 15 Million Actuations
Stacker (Optional)
✝
Number of Trays: 1 Tray
Tray Capacity: 5,000 Sheets
(Straight or Offset Non-staple)
Paper Size: 7" x 8.27" to 14.33" x 18.5"*
Rotator Unit: Rotates 8-1/2" x 11" Portrait Sheets
90 Degrees
Document Delivery: Face-down
Power Supply: 115V
Weight: 450 lb. (203.7kg)
Dimensions (H x W x D): 49.5" x 33" x 31.6"
(125.7cm x 84.8cm x 78.7cm)
Booklet-maker (Optional)
T
ray Capacity: Conveyor Belt Output
P
aper Size: 8" x 10" to 14" x 18"
S
titching Capacity: 2 to 22 Sheets
S
titching Position
S
ingle-position Stapling: 2 Center Staple Positions
Saddle-stitched Specifications
Folding: V-folding
F
olding Capacity: 1 to 22 Sheets (20 lb. Bond)
Trimming: Edge Trim Folded Booklets
(Adjustable Trim Width)
Staple Wire Spool: 40,000 (100-sheet Stitches)
Power Supply: 115V
W
eight: 970 lb. (439.8kg)
Dimensions (H x W x D): 58" x 100" x 24"
(
147.2cm x 254cm x 58.4cm)
B
PRF
(Optional)
Power Requirements: 120 VAC, 60Hz
P
o
w
er Consumption: 920 Watts
D
imensions (H x W x D): 51" x 64" x 31"
(129c
m
x
162c
m
x
78cm)
W
eight: 562 lb. (255kg)
P
erfect Binder (Optional)
Book Thickness: 15 Sheets to 1.5" (40mm)
about
3
50 Sheets @ 20 lb. Bond
B
ook Size (In-line Binding): 8.5" x 11"
Book
S
iz
e (O
ff-line Binding): 2.36" x 4" to 12" x 14"
(
60mm x 100mm to 305mm x 356mm)
W
e
ight
(
w
ith Inp
ut
U
nit,
Delivery, and Bypass): 1,676 lb. (760kg)
Dimensions with Bypass
(
H x W x D): 45" x 8'4" x 5'11"
(1.2m x 2.6m x 1.8m)
R
oll Feed Interface Kit (Optional)
Supports Roll Systems DocuSheeter LS
S
upports Standard Hunkeler SF4-H Sheet Feeder
M
u
lti-
s
t
acker Interface Kit (Optional)
Supports up to three Stackers on one device
One kit is required for each additional Stacker
Optional Features
MICR printing*
Enhanced Feed Mode*
Digital Print Quality Adjustments*
PCL
Interpreter*
Extended Paper Size Range*
imageRUNNER Pro 125VP Specifications
*Optional license upgrade is required.
**Depends on customer job stream and number of shifts.
▲
W
ith option
al
P
aper
S
upply Module(s).
✝
Stacker is required for Booklet-maker and Perfect Binder.
■
Other optional scanners may be available. Please check with your
local Authorized Canon Dealer.
l
Caliper must fall within 3.5mil to 10mil (0.09mm to 0.25mm).
0055W492
0206R-iRPRO125VP-6M-LV
Ado
be, P
o
s
tSc
ript, and the P
ostScript logo are registered trademarks of Adobe Systems Incorporated in
the United States and/or other countries. Sun is a service mark of Sun Microsystems, Inc. in the United
States and other countries. MicroPress is a registered trademark of Electronics for Imaging, Inc. in the U.S.
Patent and Trademark Office and/or certain other foreign jurisdictions. Digital StoreFront is a trademark
of Electronics for Imaging, Inc. PlanetPress is a registered trademark of Objectif Lune. UNIX is a
registered trademark of the Open Group in the U.S. and other countries. XEROX is a trademark of Xerox
C
orporation in the U.S. and/or other countries. IBM is a registered trademark of IBM in the United States.
MultiStream is a trademark of Captiva Software Corporation. CANON and IMAGERUNNER are registered
trademarks, and SMARTBOARD and the GENUINE Logo are trademarks of Canon Inc. in the United States
and m
a
y
al
so be r
egistered trademarks or trademarks in other countries. IMAGEANYWARE is a trademark
of Canon. All referenced product names and other marks are trademarks of their respective owners.
Specifications subject to change without notice.
©
2006 Canon U.S.A., Inc. All rights reserved.
printed on recycled
paper in the u.s.a.
E
*Optional Accessories
NOTE: Cannot configure the imageRUNNER Pro
125VP with both the Booklet-maker and the in-line Perfect Binder at the same time.
PC running SmartBoard
Software*
Marking Engine
Inserter*
FinisherPuncher*
Perfect Binder*
Booklet-maker*
BPRF*
Stacker(s) *
with
Removable
Dolly
Paper Supply
Modules*
System
Controller
DR-7080C
1-800-OK-CANON
www.usa.canon.com
Canon U.S.A., Inc.
One Canon Plaza
Lake Success, NY 11042