Owner's Manual

198
You can select one of four methods to measure the subject brightness.
In Basic Zone modes, evaluative metering is set automatically. (In the
<8: x> and <v: X> modes, center-weighted average metering is
set.)
1
Press the <D> button (9).
2
Select the metering mode.
 While looking at the LCD panel, turn
the <6> or <5> dial.
q:Evaluative metering
w:Partial metering
r:Spot metering
e:Center-weighted average
metering
q Evaluative metering
General-purpose metering mode suited even
for backlit subjects. The camera adjusts the
exposure automatically to suit the scene.
w Partial metering
Effective where there are much brighter lights
around the subject due to backlight, etc. Partial
metering covers approx. 6.0% of the viewfinder
area at the center.
r Spot metering
Effective when metering a specific part of the
subject or scene. Spot metering covers approx.
3.8% of the viewfinder area at the center.
q Selecting the Metering ModeN