Owner's Manual

67
This is a connection mode available when using an access point
compatible with WPS. In PIN code connection mode (PIN mode), an 8-
digit identification number specified on the camera is set at the access
point to establish a connection.
 Even if there are multiple access points active in the surrounding
area, a relatively reliable connection can be established using this
shared identification number.
 It may take approx. one minute to establish a connection.
1
Select [Wireless communication
settings].
 Under the [51] tab, select [Wireless
communication settings], then
press <0>.
2
Select [Wi-Fi function].
 Set [Wi-Fi/NFC] to [Enable], then
select [Wi-Fi function].
3
Select an item.
 Press the <W> <X> or <Y> <Z>
keys to select an item, then press
<0>.
 When selecting [z] (Transfer imgs
between cameras), see “Easy
Connection” (p.25).
 When you select [m] (Upload to Web
service), a screen to select a Web
service is displayed. Select a Web
service and press <0>.
 Depending on the selected Web
service, the [Send to] screen is
displayed. Select a destination (p.76).
Connecting via WPS (PIN Mode)