Owner's Manual

Table Of Contents
85
10
Wi-Fi Connection to a
Printer
This section explains how to connect the camera to a
printer via a Wi-Fi access point.
The instructions in this chapter are continued from Chapter
7.
Connection is possible for wireless compatible printers
supporting PictBridge (Wireless LAN).
These instructions should be followed only after the printer
is connected to a Wi-Fi access point. For information about
settings and configuration, refer to the documentation
provided with each device or contact the manufacturer.
When connecting by selecting [Easy connection], see
Chapter 6 (p.51).
When in <F>, <G>, <A>, <B>, <C>, or <D> mode,
when HDR shooting is set, or when Multi Shot Noise Reduction is
set, the camera cannot be connected to a printer.