User Manual

223
With the interval timer, you can set the shooting interval and the number
of shots. The camera will take a series of single shots at the set interval
until the set number of shots are taken.
1
Select [Interval timer].
 Under the [z4] tab (the [z2] tab in
Basic Zone modes), select [Interval
timer], then press <0>.
2
Select [Enable].
 Select [Enable], then press the
<B> button.
3
Set the shooting interval and
number of shots.
 Select the number to be set (hours:
minutes: seconds / number of shots).
 Press <0> so <r> is displayed.
 Set the desired number, then press
<0>. (Returns to <s>.)
 Interval
Settable from [00:00:01] to [99:59:59].
 No. of shots
Settable from [01] to [99]. If you set [00], the camera will keep
shooting until you stop the interval timer.
p Interval Timer Shooting