Owner's Manual

68
Connecting via WPS (PIN Mode)
4
Select [Select a network].
 Displayed when [q], [D], or [l] is
selected in step 3. Go to step 5 when
selecting [o] or [m].
 Select [OK] and press <0> to go to
the next screen.
5
Select [Connect with WPS].
6
Select [WPS (PIN mode)].
 Select [OK] and press <0> to go to
the next screen.
7
Specify the PIN code at the
access point.
 At the access point, specify the 8-digit
PIN code displayed on the camera's
LCD monitor.
 For instructions on setting PIN codes
at the access point, refer to the
access point’s instruction manual.
 After the PIN code is specified, select
[OK] and press <0>.
For [Camera access point mode] displayed in step 5, see page 76.