User Manual

276
You can select an AF method to suit the shooting conditions and your
subject. The following AF methods are provided: [
u
(face)+Tracking
]
(p.277), [
FlexiZone - Multi
] (p.279), and [
FlexiZone - Single
] (p.281).
If you want to achieve precise focus, set the lens’s focus mode switch to
<
MF
>, magnify the image, and focus manually (p.288).
1
Press the <f> button.
2
Select the AF method.
Turn the <
6
> dial to select the AF
method, then press <
0
>.
Focusing with AF (AF Method)
Selecting the AF Method
You can also set the AF method with [z5: AF method] (the [z3] tab in
Basic Zone modes).
The procedures on pages 277-282 assume that One-Shot AF is set. If
Servo AF is set, the AF point will turn blue when focus is achieved. The
beeper will not sound in this case (p.274).
In the <8: 5C> modes, Servo AF is set automatically and when
focus is achieved, the AF point will turn blue and the beeper will sound.