User Manual

ENG-10
YoucanusetheimagestabilizerinAForMF
mode.
Thisfunctionprovidesoptimalimagestabilization
dependingonshootingconditions(suchas
shootingstillsubjectsandfollowingshots).
1 Set the STABILIZER switch to ON.
Ifyouarenotgoingtousetheimagestabilizer
function,settheswitchtoOFF.
2
When you press the shutter button halfway,
the Image Stabilizer will start operating.
Makesuretheimageintheviewnderisstable,
thenpresstheshutterbuttontherestoftheway
downtotakethepicture.
TheImageStabilizercannotcompensatefora
blurredshotcausedbyasubjectthatmoved.
TheImageStabilizermaynotbefullyeffective
ifyoushootfromaviolentlyshakingvehicleor
othertransportation.
TheImageStabilizerconsumesmorepower
thannormalshooting,resultinginfewershots
andashortermovieshootingtime.
Whenshootingastillsubject,itcompensatesfor
camerashakeinalldirections.
Itcompensatesforverticalcamerashakeduring
followingshotsinahorizontaldirection,and
compensatesforhorizontalcamerashakeduring
followingshotsinaverticaldirection.
Whenyouuseatripod,theImageStabilizer
shouldbeturnedofftosavebatterypower.
Evenwithamonopod,theImageStabilizerwill
beaseffectiveasduringhand-heldshooting.
However,dependingontheshootingconditions,
therearecasesinwhichtheImageStabilizer
effectmaybelesseffective.
Theimagestabilizerfunctionalsooperateswhenthe
lensisusedwithanExtensionTubeEF12IIorEF25II.
TheImageStabilizerwilloperateevenwhenyou
pressthebuttonassignedtotheAFfunctionwith
thecamera’sCustomFunctions.
Image Stabilizer
5