Instruction Manual

Loading the Film
ra
»A film speed of ISO 400 is recommended.
• The film speed is set to ISO 25 when non-DX
film is loaded. If the film does not have a DX-
code, insert it into the film compartment, close
the back cover and press the shutter button
once or twice.
• For slide (reversal) film, you can use DX-
coded film speeds of ISO 25, 50, 100, 200,
400. 800. 1600 and 3200.
Removing the Film
' ^
t The film rewinds
automatically when it
reaches the end
When S blinks, open the
back cover and remove the
film.
* •
Rewinding the Fiim in Mid-roii
• Use the strap buckle pin on
the strap buckle to press
the ^0 button on the
bottom of the camera.
• Hold the button down until
the film starts to rewind.
H-12