Instruction Manual

ìiirning the Power On
Press the main switch.
^Hold down the main switch
for approximately 1
second The lens is set to
the wide-angle position
• If you press the main
switch again, the lens
retracts, the lens cover
closes and the camera
switches off.
• When you switch the
camera off, the display on
the LCD panel does not
disappear
u Do not push on the lens with your hand
Checking the Battery Level
Check that 5® appears on the LCD panel when you
turn the power on.
(lit)
(lit)
(blinking)
The battery level OK.
Prepare new battery
Load a new battery (->10)
A new battery will generally provide enough
charge to shoot approx. 17 rolls of 24-exposure
film (based on Canon's Standard Test Method at
normal temperature and with 50% flash use). At low
temperatures (-10°C/14°F), the battery life is
approximately one third of the normal figure.
When you lake consecutive shots using the
^ flash, the battery level may drop off temporarily
and prevent the LCD panel from displaying
Information correctly. If this occurs, switch the
camera off and wail a few minutes before
switching it back on again.
E-13