Getting Started

2
Installing the Ink Tank
You can watch the procedure on a movie by scanning
the QR codes.
Android iOS
1
Open the scanning unit / cover.
Do not touch the print head holder (A) until it
stops.
(A)
2
aRemove the orange tape.
bRemove the protective wrap.
a
b
Remove the orange tape completely.
3
Hook the orange cap with your nger to remove it
GENTLY.
(A) Do not push the both sides of the ink tank with
the Y-shape air hole blocked.
(B) Do not touch.
(A)
(B)
4
Insert the ink tank into the print head holder and
push it down rmly until it snaps into place.
After the lamp lights up, install the next ink tank.
5
Check that all lamps are lit.
6
LIFT UP the scanning unit / cover, and then close
it.
If an error message appears, make sure the ink
tanks are installed correctly.
Loading Paper / Aligning the Print
Head
You can watch the procedure on a movie by scanning
the QR codes.
Android iOS
To obtain better print result, print a pattern for print head
alignment and scan it.
1
aPull out the cassette.
bRemove the cassette cover.
a
b