User Guide
Table Of Contents
- Contents
- Important Safety Instructions
- Basic Operations
- Copying
- Faxing
- Configuring Initial Settings for Fax Functions
- Sending Faxes
- Receiving Faxes
- Sending and Receiving Faxes According to Your Purposes
- Checking Status and Log for Sent and Received Documents
- Importing/Exporting Address Book Data with the Supplied Software
- Sending Faxes from Your Computer (PC Fax)
- Using the Machine as a Printer
- Using the Machine as a Scanner
- Preparing to Use the Machine as a Scanner
- Scanning from the Machine
- Scanning from a Computer
- Convenient Scanning with a Machine-Based Operation
- Can Be Used Conveniently with a Mobile Device
- Network
- Connecting to a Network
- Viewing Network Settings
- Configuring the Machine for Printing or Faxing from a Computer
- Configuring Scan Settings (E-Mail/Shared Folders)
- Configuring the Machine for Your Network Environment
- Security
- Using Remote UI
- Setting Menu List
- Troubleshooting
- Maintenance
- Appendix
- SIL OPEN FONT LICENSE
Setting IPv4 Address
1469-06E
The machine's IPv4 address can be either assigned automatically by a dynamic IP
addr
essing protocol, such as DHCP, or entered manually. When connecting the
machine to a wired LAN, make sure that the connectors of the LAN cable are rmly
inserted into the ports (
Connecting to a Wired LAN(P. 318) ). Y
ou can test the
network connection if necessary.
Setting IPv4 Address(P. 337)
Testing the Network Connection(P. 339)
Setting IPv4 Address
1
Tap <Menu> in the <Home> Screen.
2
Tap <Network Settings>.
● If a scr
een for entering a PIN is displayed, enter the PIN with the numeric keys and tap <Apply>.
Setting
the System Manager PIN
(P. 397)
3
Select <TCP/IP Settings>
<IPv4 Settings> <IP Address Settings>.
4
Congure IP addr
ess settings.
<Auto Acquir
e>
Select to automatically assign an IP address via a protocol such as DHCP. When <Auto Acquire: On> is
displayed, automatic addressing is enabled.
<Manually Acquir
e>
Select to congure the IP address settings by manually entering an IP address. In order to select this
option, <Auto Acquire> must be set to <Off>.
<Check Settings>
Select when you want to vie
w the current IP address settings.
Automatically assigning an IP address
1
Select <Auto Acquire>
<Select Protocol>.
Network
337