User Guide
Table Of Contents
- Contents
- Important Safety Instructions
- Basic Operations
- Copying
- Faxing
- Configuring Initial Settings for Fax Functions
- Sending Faxes
- Receiving Faxes
- Sending and Receiving Faxes According to Your Purposes
- Checking Status and Log for Sent and Received Documents
- Importing/Exporting Address Book Data with the Supplied Software
- Sending Faxes from Your Computer (PC Fax)
- Using the Machine as a Printer
- Using the Machine as a Scanner
- Preparing to Use the Machine as a Scanner
- Scanning from the Machine
- Scanning from a Computer
- Convenient Scanning with a Machine-Based Operation
- Can Be Used Conveniently with a Mobile Device
- Network
- Connecting to a Network
- Viewing Network Settings
- Configuring the Machine for Printing or Faxing from a Computer
- Configuring Scan Settings (E-Mail/Shared Folders)
- Configuring the Machine for Your Network Environment
- Security
- Using Remote UI
- Setting Menu List
- Troubleshooting
- Maintenance
- Appendix
- SIL OPEN FONT LICENSE
Placing Documents
1469-00R
Place documents on the platen glass or in the feeder. Use the platen glass when scanning thick or bound documents
such as books. Y
ou can load two or more sheets of documents in the feeder so that they can be scanned continuously.
For information about the types of documents that can be placed on the platen glass or in the feeder, and information
about the scannable area of a document, see
Document Type(P. 647) or Scan Area(P. 648) .
Placing Documents on the Platen Glass(P. 41)
Placing Documents in the Feeder(P. 42)
Use documents that are completely dry
When placing documents, mak
e sure that any glue, ink, or correction uid on the documents has completely
dried.
To avoid paper jams
Do not place the following types of documents in the feeder as this may cause paper jams:
● W
rinkled or creased paper
● Carbon paper or carbon-backed paper
● Curled or rolled paper
● Coated paper
● Torn paper
● Onion skin or thin paper
● Stapled or clipped documents
● Paper printed by a thermal transfer printer
● Transparencies
To scan documents more accurately
Documents placed in the feeder ar
e scanned while being fed into the machine. On the other hand, documents
placed on the platen glass remain in a xed position while they are scanned. To ensure more accurate scanning
results, placing documents on the platen glass is recommended.
To scan tracing paper or transparencies
To scan transparent documents (for example, tracing paper or transparencies), place them on the platen glass.
Placing Documents on the Platen Glass
1
Open the feeder.
Basic Operations
41